How to talk to the spotter while positioning a mobile crane
Steps for mobile crane operators to talk to the spotter while positioning a mobile crane, with tool choices and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Agree on the signals with the spotter before the move, keep the spotter in view of the operator, and stop whenever a signal is unclear. If the crew uses a phone tool, OperatorLink shows STOP, HOLD and SLOW to every phone in a browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before the move, the operator and the spotter need the same plan. Name the spotter for the lift, agree on the signals for start, stop, slow and hold, and confirm that the spotter can see the crane, the load and the path it will take. Keep one clear channel for signals, whether that is hand signals, a radio, or a shared phone tool. Check that the site rules say who may direct the crane, and that everyone on the crew knows the plan before the engine starts.
If the crew uses a phone tool, each phone needs a working browser and a data signal, because the signals travel between phones over the phone network. [1] The person who starts the session shares a link or QR code, and the crew joins from it. [1] A session with nobody in it is wiped after 3 idle hours, so start a fresh session for each shift. [1]
Step by step
- Before the move, agree with the spotter on the signals for start, stop, slow and hold, and say out loud what each one means.
- Place the spotter where they can see the crane, the load and the path it will take, and confirm the operator can see the spotter.
- Start the move slowly, and pause at each change of direction so the spotter can give the next signal.
- Repeat any signal the operator is not sure of, and stop until both people agree on it.
- If the crew uses OperatorLink, confirm every phone has joined the same session from the shared link or QR code. [1]
- On OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so the whole crew sees it at once. [1] HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1]
- Keep a fallback ready, such as a hand signal or a radio call, in case a phone stops working during the lift.
- When the load is set, bring the crane to a stop and confirm the spotter agrees before anyone moves near the load.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the spotter stays in view of the operator, and whether the phone locks its screen during the lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready, since signals in a browser depend on the phone's data signal. [1]
Common mistakes to avoid
Do not start the move before the spotter is in place and can see the load path. Do not accept a signal that is not clear. Stop and repeat it instead. Do not rely on a single channel for every signal, because one failure would leave the crew with nothing. Do not assume every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Do not leave an old session open and expect it to work on the next shift. A session with nobody in it is wiped after 3 idle hours. [1] A jobsite link also stops working 12 hours after the first person joins it. [1] Do not forget that HOLD and SLOW stay on for everyone until the last person leaves, so someone has to clear them on purpose. [1] Do not let the phone sleep during the lift. Adding the page to the home screen lets it open as a standalone app, but the screen settings still need checking. [1]
Frequently asked questions
Is OperatorLink free to use?
Yes, OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals run through a phone browser, so each phone still needs a working data signal for the whole shift. Check the phone's data plan before relying on it for a crane lift, and keep a hand signal or radio call ready as a backup in case a phone stops working.
What does the STOP signal do in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone in the jobsite until the last person leaves. [1] Because of this, the crew should agree on what each signal means before the lift starts.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, the person who starts the jobsite can open a new session and share the new link or QR code with the crew. [1]
Does OperatorLink make every phone buzz?
No, because the buzz depends on the browser. On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on the screen. Check the sound and screen settings on every phone in the crew before the lift so nobody misses a signal.
Can crew members talk by voice during a crane move in OperatorLink?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are also sent as chat messages. [1] Voice depends on the phone's data signal, so keep a radio or hand signal ready as a fallback for the spotter and the operator. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift