2Dig Plain comparisons of crane signalling and jobsite communication tools

Call hold when a load goes out of level

Call HOLD when a suspended stage or event load goes out of level. What to prepare, the steps, and communication options to consider.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

When a suspended stage or event load moves out of level, the crew needs to call HOLD clearly and pause movement until the situation has been checked. Agree before the lift on who can call HOLD, how everyone will receive the signal and how movement will resume. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, with no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before lifting a stage or event load, agree on the exact word that means stop movement, who can call it and how the crew will acknowledge the call. Put a signal person where the load and its level can be seen clearly, and make sure the people controlling movement know whose instructions to follow. Every crew member should understand what happens after HOLD is called and who confirms that the load can move again.

Button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] Check that everyone has joined before the lift begins. [1] [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves, so agree how the crew will handle these signals before movement starts. [1]

Have a backup communication method ready in case the main method is unavailable. Decide where crew members should look and listen for the HOLD call, especially if some people cannot see the load directly. A jobsite with nobody in it is wiped after 3 idle hours. [1] OperatorLink can also be added to a phone's home screen as a standalone app. [1]

Step by step

  1. Before the lift, agree on who can call HOLD, what words will be used and how the crew will confirm the call has been received. Put the person watching the load where its level can be seen clearly.
  2. Check the agreed communication methods before the load leaves the ground. Button presses, chat and voice pass between phones in a browser. [1]
  3. If using OperatorLink, have the person starting the jobsite open it in a phone browser. No app installation is needed. [1]
  4. Have that person share the jobsite link or QR code so each crew member can join. [1] Confirm the people involved in the lift have joined before starting movement. [1]
  5. Explain how HOLD will be used. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]
  6. Watch the load as it moves. If it goes out of level, call HOLD clearly using the agreed method and pause movement.
  7. Confirm that the crew has received the call before considering any further movement. With OperatorLink, holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
  8. Check the load and its rigging condition before deciding what happens next. Do not resume movement until the responsible crew members have agreed it is safe to proceed.
  9. When using OperatorLink, remember that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] At the end of the shift, everyone can leave the session; a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [1] [1] HOLD remains on for everyone in the jobsite until the last person leaves, so the crew should agree in advance how to handle the signal before resuming a lift. [1]

A phone video call app is another option, and its details are not published. No facts here describe one, so check whether everyone involved in the lift can join, whether the person watching the load can be seen and heard clearly, and whether the call stays available during the lift.

A two-way radio is another option, and its details are not published. No facts here describe one, so check that everyone agrees on the words used to call HOLD, that each crew member can hear the call over site and show noise, and that the channel can be used when needed.

Choose the communication method the crew can use clearly at the site, and agree on a backup before the lift begins. OperatorLink passes button presses, chat and voice between phones in a browser. [1] When some crew members cannot see the load, confirm how they will receive and acknowledge a HOLD call.

Common mistakes to avoid

Calling HOLD without agreeing on who can give the instruction can leave crew members uncertain about whose direction to follow. Before the lift, set the call words, the person responsible for watching the load and the process for acknowledging the signal. Relying only on a phone signal can leave crew members without the alert if the connection drops, so agree on a backup method. OperatorLink passes signals between phones through a browser. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves can cause confusion about when the signals clear. [1] Leaving a jobsite empty and expecting it to remain available can also cause problems, because a jobsite with nobody in it is wiped after 3 idle hours. [1] If using OperatorLink, check that a move is still arriving: if it stops arriving for 2 seconds, the other phones drop it. [1] Agree on how to confirm the load is ready before any movement resumes.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser and passes button presses, chat and voice between phones. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

What happens when the HOLD button is pressed?

HOLD stays on for everyone in the jobsite until the last person leaves. [1] STOP is different: it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Before movement resumes, the crew should check the load and agree that it is ready to move. The crew should also agree in advance how HOLD will be handled and who can authorize movement to resume.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a fresh jobsite and share its link or QR code with the crew. [1]

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the alert on each type of phone before the lift, and agree on a backup way to communicate if someone does not notice it.

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Button presses, chat and voice pass between phones in a browser. [1] Agree on a backup way to communicate before the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons