Call HOLD when a load nears live process equipment
How refinery turnaround crews call HOLD when a load nears live process equipment, what to have ready, the steps and tool choices.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
When a load nears live process equipment, agree on the point to call HOLD and make sure the crew knows how to signal a stop.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Lets the crew see STOP, HOLD and SLOW and exchange button presses, chat messages and voice calls through phone browsers [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
To call HOLD when a load nears live process equipment, the crew needs phones with a working browser and a data signal, because the signal travels over the phone network. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] Agree before the shift on the distance at which a load counts as too near, so every crew member calls HOLD at the same point. A jobsite with nobody in it is wiped after 3 idle hours. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] The page can be added to the phone's home screen as a standalone app. [1]
Step by step
- Check each phone has a working browser and a data signal, because signals pass between phones in a browser. [1]
- Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the ground crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the lift begins, so each one sees the same signal. [1]
- Agree on the distance from the live equipment at which any crew member calls HOLD, so the signal arrives before the load gets close.
- Press HOLD when the load reaches that distance. HOLD stays on for everyone in the jobsite and is cleared only when the last person leaves. [1]
- Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while checking the load against the equipment. [1]
- If a sudden stop is needed, pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
- A jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It lets the crew see STOP, HOLD and SLOW and exchange button presses, chat messages and voice calls using phone browsers. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A phone video call app is another option. No facts here describe one, so check whether the crew can keep the call open, whether the signal person's hands stay in view, and whether the phone screen stays available during the lift.
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open, whether the signal person's hands stay in view, and whether the phone screen stays available during the lift.
A two-way radio is a third option. No facts here describe one, so check whether the crew agrees on plain voice, whether members can hear each other over machine noise, and whether the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.
Common mistakes to avoid
Waiting for a distance call instead of agreeing it first: if the crew has not set the point at which a load counts as too near, the call arrives after the load is already close. Relying on one phone for the call: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. [1] Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD stays on for everyone until the last person leaves, so the crew has to clear it on purpose. [1] Not confirming that a direction command is still arriving: holding a direction button keeps sending that command to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1] The page can be added to the phone's home screen as a standalone app. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals pass between phones through a browser, so a working data signal is needed. [1] Check the phone's data plan before relying on it to call HOLD near live process equipment.
Does HOLD stay on for everyone until the area is clear?
HOLD stays on for everyone in the jobsite and is cleared only when the last person leaves. [1] Check the agreed site signals and confirm that the crew is ready before moving the load again.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.
Do HOLD calls show on every phone at the same time?
HOLD stays on for everyone in the jobsite until the last person leaves, so every member sees the same signal. [1] On Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone in the crew before the lift.
Can crew members talk over the phone during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback when a load nears live process equipment.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- How to call hold when a load shifts during a lift
- Call hold when a load shifts over water for dam work