2Dig Plain comparisons of crane signalling and jobsite communication tools

Call hold when a load shifts over water for dam work

Learn how dam and hydro construction crews can prepare to call HOLD when a load shifts over water, follow clear steps, and compare communication options.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

When a load shifts over water, the crew needs an agreed way to call a pause and a clear plan for communicating with everyone involved. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] The phones need a working data signal, iPhone Safari ignores the buzz, and an empty jobsite is wiped after 3 idle hours. [1] [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To call HOLD when a load shifts over water, the crew needs phones with working browsers and data signals, because button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] Before the lift, agree who gives the HOLD call, what words the crew will use to call a pause, and how the crew will communicate if a phone loses its data signal. Check that everyone knows which phone to watch and how to raise a concern if a signal is unclear. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left empty may need to be started again. [1] The page can be added to a phone's home screen as a standalone app. [1]

Step by step

  1. Check each phone has a working browser, because button presses, chat and voice pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the ground crew, and each member joins from it. [1]
  4. Confirm that the crew knows how to join the jobsite session and where to see the signals. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [1]
  5. Agree on the words the crew will use to call a pause when a load shifts. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  6. Understand how move buttons behave before the lift. Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
  7. When the load shifts, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  8. Pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  9. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

Common mistakes to avoid

Relying on one phone for the HOLD signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Waiting until a load is already over water to agree on who gives the HOLD call and what words to use.

Frequently asked questions

Is OperatorLink free for dam and hydro construction crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] HOLD is shown through a phone browser, so the phone needs a working data signal for the shift. [1] Check whether the work area has a usable phone data signal before relying on browser-based signals. Agree on a backup communication method for the lift, and make sure the crew knows when to use it if a signal does not arrive.

What happens when HOLD is pressed in OperatorLink?

HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [1] STOP behaves differently: it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Agree on what the crew should do when a load shifts, and do not assume a screen signal alone settles whether it is safe to resume the lift.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]

Do HOLD signals buzz on every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz. [1] Check how alerts appear on each phone before the lift. Do not assume that every phone will buzz when a signal arrives, and agree on another way to communicate if someone does not see an alert.

Can OperatorLink carry voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice and chat pass between phones in a browser, so the phones need a working data signal. [1] Agree on a fallback communication method before the lift in case a phone signal is unavailable or a message is unclear.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons