Calling material lifts to upper decks for scaffolding crews
Signal material lift calls to upper decks on scaffolding jobs with STOP, HOLD and SLOW on a phone browser. Ready list, steps, tool choices and mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
A phone session in a browser lets the scaffolding crew call material lift moves to the upper decks. [1] One person starts the session and shares a link or QR code, and the crew joins from it. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before a material lift moves to an upper deck, the scaffolding crew needs one person on the ground who can see the lift and the deck, a clear set of call words that everyone agrees on, and phones that can stay connected for the whole shift.
Each phone needs a working browser and a data signal, because the calls pass between phones in a browser. [1] Decide who starts the session, since that person shares a link or QR code and the rest of the crew joins from it. [1]
Decide who watches the upper deck and who calls each move. HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so the crew should know that before the first lift. [1] If a session has sat empty, it is wiped after 3 idle hours, so start a fresh session at the beginning of each shift. [1] Add the page to the phone's home screen before the lift so it opens as a standalone app. [1]
Step by step
- Check that each phone has a working browser and a data signal for the whole shift. [1]
- Have the person who starts the session open it in a phone browser. No app install is needed. [1]
- That person shares the link or QR code with the scaffolding crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the first lift, so everyone sees the same signals. [1]
- Agree before the lift who calls each move and who may call STOP. When STOP is pressed, every held direction is released on every phone and everyone else sees a full-screen alert, so the crew pauses and looks before moving again. [1]
- When a move button is held, that move keeps going to the other phones. If it stops arriving for 2 seconds, the other phones drop it, so keep the button held only while the lift is moving and confirm the crew can see it. [1]
- At the end of the shift, everyone leaves the session. HOLD and SLOW stay on until the last person leaves, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]
Tools that can do it
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in the browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
Anyone who joins can take part in a voice call run from the phone browser. [1] One-tap radio-style calls are sent as chat messages. [1] On Android browsers, signals such as STOP make the phone buzz. [1]
A phone video call app is a second option. No facts are available for it on this page, so check whether the call can stay open for the whole shift, whether the signal person can keep the lift and the deck in view, and whether the phone locks its screen during a lift.
A two-way radio is a third option. No facts are available for it on this page, so check that every crew member can be heard over the noise on site, that the crew agrees on the call words, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready, since a phone browser depends on the phone's data signal.
Common mistakes to avoid
Relying on one phone for every call. Any phone can lose its data signal, so keep a voice or hand option ready for STOP.
Assuming every phone alerts the same way. On Android browsers, STOP makes the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [1]
Starting an empty session the day before and expecting it to hold. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on until the last person leaves. [1]
Keeping a move button pressed without watching the lift. If a move button is held and the move stops arriving for 2 seconds, the other phones drop it. [1]
Letting the phone sleep during a lift. Check the phone's screen settings before the shift starts.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals run through a phone browser, so each phone still needs a working data signal for the whole shift. [1] Check the phone's data plan before relying on it for material lifts, and keep a second way to call moves ready in case the signal drops during the shift.
What does STOP do on the phones for scaffolding crews?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1] Agree on what each signal means with the whole crew before the first lift starts.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift, so nobody misses a signal.
Can the crew talk by voice during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls are sent as chat messages. [1] Voice runs through the phone browser, so it depends on each phone's data signal, and a radio or hand signal should stay ready as a fallback for the shift. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift
- Call hold when a load shifts over water for dam work