How to stay linked to the operator during high-noise bolting
Steel erector crews can keep the operator linked during high-noise bolting with STOP, HOLD and SLOW on phones. Steps, what to prepare, and tool options.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Steel erector crews can keep the operator linked during high-noise bolting by joining one jobsite session in a phone browser, with one person sharing a link or QR code. [1] [1] OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones. [1] Keep hand signals or a radio ready as a fallback, since a phone's data signal can drop.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Start with one phone per crew member, each with a working browser and a data signal for the whole shift, since the signals travel between phones through the browser. [1] Pick one person to start the jobsite session and share its link or QR code, so every steel erector joins from the same link. [1] Agree before the first bolt who the signal person is, which signals the crew uses, and what each one means, so nobody is guessing when the noise rises. HOLD and SLOW stay on for everyone until the last person leaves, so someone has to clear them on purpose. [1] A link from an earlier shift may no longer open, because a jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so start fresh at the beginning of each shift. [1] Keep hand signals or a radio ready in case a phone loses its signal.
Step by step
- Walk the bolting zone with the operator and the signal person before work starts, and agree on where the signal person stands so the operator can see them.
- Agree on each signal and what it means before the first bolt, and write the list on a card that every steel erector can read.
- Test every phone with the whole crew before the lift, including the sound and the screen, so nobody learns the alert settings in the middle of the work.
- Have the signal person confirm the operator can see each signal before any move starts.
- Give one signal at a time, and keep chatter off the signal channel while bolting is under way.
- When STOP is given, everyone stops, looks around, and confirms the work is clear before any movement starts again.
- When the work pauses, clear any signal that is still held so the crew does not act on an old instruction.
- At the end of the shift, everyone leaves the session, and the crew checks that each phone is charged and that no one has a signal still on screen.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nothing needs to be installed, since the page runs in a browser, and the phone can be added to its home screen as a standalone app. [1] [1] A press-and-hold move keeps sending to the other phones, and if it stops arriving for 2 seconds, they drop it. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]
A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole shift, whether the signal person stays in view of the operator, and whether the phone locks its screen during a lift.
A two-way radio is a third option. No facts here describe one, so check that every crew member can be heard over bolting noise, that the channel stays clear through the lift, and that everyone agrees on the words used.
Hand signals from a signal person need no device, so they can serve as the fallback when a phone drops its signal, provided the operator can see the signal person. Match the option to the crew and the site, and keep a fallback ready.
Common mistakes to avoid
Relying on one phone for the signal. If that phone loses its data signal, the crew cannot count on it, so keep hand signals or a radio ready. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone. [1] Leaving HOLD or SLOW on after the work stops, when they stay on for everyone until the last person leaves. [1] Reusing an old link from an earlier shift, since a jobsite link stops working 12 hours after the first person joins it. [1] Expecting an empty session to be there the next day, since a jobsite with nobody in it is wiped after 3 idle hours. [1] Continuing a press-and-hold move while the signal is weak, since a move that stops arriving for 2 seconds is dropped by the other phones. [1]
Frequently asked questions
Is OperatorLink free to use for steel erector crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Because it runs in a phone browser with no app install, the only ongoing need is a phone with a working data signal for the whole shift. [1] Check your phone's data plan before the shift, since the signals depend on it. Free use today does not replace a fallback plan, so keep hand signals or a radio ready for the lift.
What does OperatorLink do when STOP is pressed during bolting?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew sees it at once. [1] HOLD and SLOW behave differently, since they stay on for everyone until the last person leaves the jobsite. [1] Agree before the shift on who acts on STOP first, and confirm each steel erector can see the alert on their own phone.
Does OperatorLink buzz every phone when a signal is sent?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Before the first bolt, test the sound and screen on each phone with the whole crew, and make sure every steel erector knows which alert they will see and hear. A crew with a mix of phones should plan for both cases.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Start a fresh session at the beginning of each shift and share the new link or QR code with every steel erector before the lift begins.
Can OperatorLink carry voice and chat during a noisy steel erection shift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages, so a crew member can send one without speaking. [1] Voice depends on the phone's data signal, and high noise can make voice hard to hear, so keep hand signals or a radio as the fallback.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift