2Dig Plain comparisons of crane signalling and jobsite communication tools

How steel erectors send and hear STOP signals

Steps for steel erectors to send and hear STOP signals while landing steel, with what to have ready, tool options and common mistakes to avoid.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink is one option for sending and hearing STOP, HOLD and SLOW signals while landing steel. It runs in a phone browser with no app install, and the person who starts the jobsite shares a link or QR code that the crew joins from. [1] [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Steel erectors who want STOP, HOLD and SLOW signals on a phone need a phone with a working browser and a data signal for the whole shift. [1] Nobody has to install an app, because the page runs in the browser. [1] Choose one person to start the jobsite. That person shares a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open. [1] Decide ahead of time who will press STOP. STOP stops every move being held down on every phone and shows a full-screen alert to everyone else. [1] Agree on how HOLD and SLOW will be cleared, since they stay on for everyone until the last person leaves the jobsite. [1]

Step by step

  1. Before the first lift, check that every phone has a working browser and a data signal for the whole shift. [1]
  2. Have one person open the jobsite from a phone browser. No app install is needed. [1]
  3. That person shares the link or QR code, and every member of the crew joins from it. [1]
  4. Confirm everyone is in before the lift starts, so each person sees the same STOP, HOLD and SLOW signals. [1]
  5. Agree before the lift that HOLD and SLOW stay on until the last person leaves the jobsite. [1]
  6. If a move button is held, it keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it. [1]
  7. Press STOP at once when anyone sees a problem. STOP stops every move being held down on every phone and shows a full-screen alert to everyone else. [1]
  8. Use short confirmations such as Go Ahead, Copy That and All Clear. These are sent as chat messages. [1]
  9. After the lift, everyone leaves the jobsite. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Anyone who joins can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] On Android browsers, signals such as STOP make the phone buzz. [1] The app can also be added to a phone's home screen as a standalone app. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A phone video call app is a second option. No facts are available here about how it handles STOP, HOLD or SLOW, so check whether the call stays open for the whole lift, whether the signal person stays in view, and whether the phone locks its screen during the lift.

A two-way radio is a third option. No facts are available here about it, so check that the crew agrees on plain voice calls, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Pick the option that matches the crew and the site, and keep a fallback ready in case a phone loses its connection.

Common mistakes to avoid

Relying on one phone for every signal. Keep a voice or hand signal ready as a backup, since any phone can lose its connection.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before the lift. [1]

Reusing an old link. A jobsite link stops working 12 hours after the first person joins it, so share a fresh link or QR code for each shift. [1]

Expecting an empty jobsite to still be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1]

Assuming a held move is still reaching everyone. If a move stops arriving for 2 seconds, the other phones drop it, so keep watching the load. [1]

Frequently asked questions

Is OperatorLink free to use for steel erectors?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew can join without downloading anything. [1] Check each phone's data plan before the shift, since the crew joins through the phone browser. [1]

What does STOP do in OperatorLink?

STOP stops every move being held down on every phone in the jobsite and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone until the last person leaves the jobsite. [1] Plan who presses STOP and what the crew does when the alert appears, before the first lift starts.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new shift, have the person who starts the jobsite share a fresh link or QR code with the crew, rather than reusing one from an earlier day.

Do OperatorLink signals buzz on every phone?

Signals do not buzz the same way on every phone. On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, though STOP still shows a full-screen alert to everyone else. [1] Check the sound and screen settings on every phone before the lift, so no one misses a STOP.

Can OperatorLink be used for voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on each phone's connection, so keep a voice or hand signal as a backup for the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons