How to run crane practice lift drills with a live voice link
Steps for crane training instructors to run practice lift drills with a live voice link on phones, plus what to prepare and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To run practice lift drills with a live voice link, the instructor opens one jobsite session in a phone browser and shares a link or QR code with the trainees. [1] [1] Anyone who joins can take part in a voice call run from the phone browser. [1] Check each phone's data signal and sound settings before the first lift.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the training crew and passes button presses, chat and voice between phones in a phone browser [1] [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Practice lift drills with a live voice link need a phone with a working browser for the instructor and for each trainee, because the signals and voice pass between phones in a browser. [1] Each phone also needs a working data signal for the whole drill, so test the signal at the training yard before the first lift.
The instructor starts the jobsite session and shares a link or QR code, and each trainee joins from it. [1] Ask every trainee to join from the same link so that everyone is in one session.
Sessions have time limits. A link stops working 12 hours after the first person joins it. [1] A session with nobody in it is wiped after 3 idle hours. [1] Start a new session for each training day.
Before the drill, add the page to each phone's home screen so it opens as a standalone app. [1] Plan a fallback such as hand signals or a radio in case a phone loses its data signal, and agree on which person holds each role before the first lift begins.
Step by step
- Confirm each phone has a working browser and a data signal at the training yard, since the signals and voice pass between phones in a browser. [1]
- Open the session from a phone browser. No app install is needed. [1]
- Share the link or QR code with the trainees, and have each one join from it. [1]
- Check that every trainee is in the session before the first lift, so each person sees the same signals. [1]
- Start the voice call for the drill. Anyone who joins can take part in it. [1]
- Use the one-tap calls Go Ahead, Copy That and All Clear for short replies. They are sent as chat messages. [1]
- Practice holding a move button. A held move keeps going to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. Keep the button held and watch the load while it moves. [1]
- Use STOP whenever the lift must pause. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so agree at the start who clears them and how the drill ends. [1]
- At the end of the drill, everyone leaves the session. A session with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the training crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the browser. [1] The instructor shares a link or QR code, and the trainees join from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
A phone video call app is a second option. No facts here describe one, so check whether trainees can keep the call open for the whole drill, whether the instructor can see each lift from the call, and whether the phone locks its screen mid-drill.
A two-way radio is a third option. No facts here describe one, so check that trainees agree on the words for each signal, that each person can be heard over machine noise, and that the channel stays clear through the drill.
Match the option to the training yard and the number of trainees, and keep a fallback ready, since a browser session depends on each phone's data signal.
Common mistakes to avoid
Relying on one phone for every signal. A phone's data signal can drop, so keep a hand signal or radio ready as well.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the sound and screen on each phone before the drill starts.
Reusing an old link for a new training day. A link stops working 12 hours after the first person joins it. [1] Start a fresh session and share the new link or QR code.
Leaving a session empty and expecting it to be there the next day. A session with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on until the last person leaves. [1] Decide before the drill who clears them.
Letting a held move go unwatched. If a held move stops arriving for 2 seconds, the other phones drop it. [1] Confirm the move still shows before the load goes further.
Letting the phone screen lock during the drill. Set each phone so the screen stays on while the drill runs.
Frequently asked questions
Is OperatorLink free to use for crane training?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Instructors can open a jobsite session and share the link or QR code without a fee from the product itself. Charges from your phone carrier for data are separate, so check the data plan on each phone before the course starts. Test the signal at the training yard on the first day so that a poor connection does not stop a drill.
What happens when someone presses STOP in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the trainees see it at once. [1] HOLD and SLOW behave differently. They stay on for everyone until the last person leaves the jobsite. [1] Explain this at the start of the drill so trainees know which signals will still be showing when they look up. Practice the STOP signal once before the first real lift.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new training day, start a fresh session and share the new link or QR code with the trainees. Anyone who joined an earlier session should join the new one from the new link.
Do OperatorLink alerts buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so an iPhone trainee has to rely on the screen to catch the signal. Check the sound and screen settings on every phone before the drill starts. Keep a hand signal ready as well, so that no trainee depends on the buzz alone during a lift.
Can trainees talk by voice in OperatorLink during a drill?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] The instructor can decide which of these to use for each drill and tell the trainees at the start. Keep a radio or hand signal as a fallback in case a phone loses its data signal.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift