How to relay depth and alignment readings from deck to cab
Pass depth and alignment readings from the bridge deck to the gantry cab: what to have ready, the steps, tool choices and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Depth and alignment readings cross from the deck to the cab inside one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] A depth figure typed into chat and the spoken reading in the voice call both reach the other phone, and STOP shows a full-screen alert to everyone else while HOLD and SLOW stay on until the last person leaves. [1] [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] An idle session is wiped after 3 hours. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Depth and alignment readings are relayed by voice and by typed message, and button presses, chat and voice pass between phones in a browser. [1]
The person who starts the jobsite shares a link or QR code, and the deck hand and the operator in the cab join from it. [1]
Agree before the gantry moves on who reads depth on the deck, who reads alignment at the cab, and the order the two readings are called in. Someone on the deck needs both hands for the tape, so settle who holds the phone at that end.
Have a paper pad at each end so each reading can be written down as it is called.
If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a session left over from the last shift may need to be started fresh. [1]
Before the first reading, add the page to the phone's home screen at both ends so it opens as a standalone app. [1]
Check that each phone will stay awake long enough to cover the launch, and charge it or carry a spare battery before the crew goes up.
Step by step
- Check each phone has a working browser and a data signal for the whole shift, because button presses, chat and voice pass between phones in a browser. [1]
- Agree the reading format: depth in the unit the crew already calls, and alignment in the same left and right words at both ends, called in the same order every time.
- Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the deck and the cab, and each member of the crew joins from it. [1]
- Confirm the deck hand and the operator are both in the session and can see each other's messages before the first reading, so both ends work from the same figure. [1]
- Type each depth reading into chat and say it in the voice call at the same time, so the cab has the figure in writing and in the ear. [1]
- Anyone who joins can take part in a voice call run from the phone browser, so keep the call open while the gantry is moving. [1]
- For acknowledgements, use the one-tap radio-style calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [1]
- When the cab asks for a correction, keep the move button held down: holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
- Press STOP the moment a reading comes back wrong or a move has to end at once: STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- Clear HOLD and SLOW on purpose, because both stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
- At the end of the shift, everyone leaves the session; a jobsite with nobody in it is wiped after 3 idle hours. [1]
- Write the last depth and alignment figures on the paper pad at each end, so the next shift starts from a known place.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A depth figure typed into chat is sent to the other phones, and the same reading can be said aloud in the voice call. [1]
A phone video call app is a second option. No facts here describe one, so check whether the call stays open for the whole launch, whether the deck hand can hold a phone and a tape at the same time, and whether the screen locks between readings.
A two-way radio is a third option. No facts here describe one, so check that the deck and the cab agree on plain voice for figures, that a reading is heard over machine noise, and that the channel stays clear through the launch.
Match the option to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.
Common mistakes to avoid
Relying on one phone for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on the deck phone and the cab phone. [1] Leaving an empty session and expecting it to hold readings the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone go to sleep mid launch. The app can be added to a phone's home screen as a standalone app. [1] Calling a figure out loud without typing it, so nothing on either screen can be read back when a number is disputed.
Frequently asked questions
Is OperatorLink free for a launching gantry crew?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a phone browser. [1] Check the phone's data plan before the crew relies on it for a launch, and keep the paper pad at each end for the moment a phone drops out.
Can OperatorLink pass depth and alignment readings between the deck and the cab?
Button presses, chat and voice pass between phones in a phone browser, so a depth figure can be typed into chat while the spoken reading goes over the voice call. [1] Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] If a call drops, check whether the phones have reconnected before the next reading is called.
What happens when the STOP button on OperatorLink is pressed?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1] They are cleared when the last person leaves the jobsite.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the deck and the cab.
Do STOP signals buzz on every phone with OperatorLink?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on the deck phone and the cab phone before the launch so nobody misses the signal, and keep a voice or hand option ready as a fallback.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift