How to reach crews quickly when plans change
When a crane plan changes, reach the crew at once with alerts, quick-call chat and voice on phones they already carry.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
When a plan changes, the dispatcher and the crew join one jobsite session in a phone browser, with the person who starts it sharing a link or QR code that the crew joins from. [1] The crew sees STOP, HOLD and SLOW and can trade chat and voice from the phones they already carry. [1] Each phone needs a working data signal, the alerts and links expire, and an idle session is wiped after 3 hours. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
To reach the crew when a job plan changes, dispatchers need every phone to see the same browser session so a change reaches everyone at once. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] Each phone needs a working browser and a data signal for the whole shift, because the signals pass between phones over the phone network. [1] Decide which phones must hear a change first, and whether the message is a quick note, a voice call or a full stop. Plan for the link to expire: a jobsite link stops working 12 hours after the first person joins it, so a link started the day before may need to be remade. [1] An idle jobsite is wiped after 3 idle hours, so an empty session does not hold a change for the next shift. [1] Before the day starts, add the page to each phone's home screen so it opens as a standalone app. [1]
Step by step
- Check that each phone has a working browser and data signal throughout the shift. [1]
- Have the person who starts the session open it from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the shift begins, so a plan change reaches each one. [1]
- For a quick change, send a one-tap radio-style call such as Go Ahead, Copy That or All Clear, which arrives as a chat message. [1]
- To talk the change through, anyone in the session can join a voice call run from the phone browser. [1]
- Hold a move button to keep sending that move to the other phones, and remember that if it stops arriving for 2 seconds, the other phones drop it. [1]
- For a full stop, STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
- At the end of the shift, everyone leaves the session, and note that a jobsite with nobody in it is wiped after 3 idle hours, so start a new session next shift. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Quick radio-style calls such as Go Ahead, Copy That and All Clear go out as chat messages, and anyone who joins can take part in a voice call from the phone's browser. [1] [1] Nobody installs an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.
Common mistakes to avoid
Depending on one phone for the alert: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Reusing an old link: a jobsite link stops working 12 hours after the first person joins it, so a stale link may not open the session. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1] Not confirming a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The alerts and chat run through a phone browser, so each phone still needs a working data signal for the shift. Check the phone data plans before relying on an alert to reach the crew.
What happens when the STOP button is pressed?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the shift so nobody misses the signal.
Can crew members talk over the phone during a change?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift