Prepare comms gear for outgoing rental equipment
Comms gear is checked and readied before equipment leaves the rental yard. What to have, the steps, tool choices and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Before equipment leaves the yard, every radio, phone and link has to be set up, charged and checked on the ground so the crew can talk and send signals at the job site. The crew joins one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] The phones need a working data signal, iPhone Safari does not buzz on alert, and an idle session is wiped after 3 hours. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
What you need before you start
To prepare comms gear for outgoing equipment, the yard needs each radio charged and on the right channel before the load leaves. Because a link-based signaling option sends signals over the phone network, the phones need a working browser and a data signal for the whole shift. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so a multi-day rental may need a fresh link for a later shift. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Before the equipment leaves the yard, add the page to the phone's home screen so it opens as a standalone app. [1] Spare chargers and a second channel plan keep the crew covered if a battery fails on site.
Step by step
- Charge every radio battery and note the charge level, so the crew starts a full-shift rental with full power.
- Test each radio on its channel in the yard before the load leaves, so a dead channel is caught here, not at the job.
- Check each phone has a working browser, because button presses, chat and voice pass between phones in a browser. [1]
- Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the ground crew, and each member joins from it. [1]
- Confirm the crew members who need the signals have joined the session before the lift begins. [1]
- HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
- Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while checking the load. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- A jobsite with nobody in it is wiped after 3 idle hours. [1]
Confirm the whole kit is packed with the load sheet, so the crew knows which channel and which session to join the next morning.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
A two-way radio is a second option. No facts here describe one, so check whether the radios are charged and tested on the assigned channel, whether every crew member can be heard over machine noise, and whether the channel stays clear through the lift.
A phone video call app is a third option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
Match the option to the crew and the site, and check what backup communication method the crew will use if the chosen method is unavailable.
Common mistakes to avoid
Sending a radio out on the wrong channel after a charge, which wastes the crew's first call on site checking in. Relying on one phone for the STOP signal without checking how the crew will receive it on their own devices. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the load leaves. [1] Leaving a jobsite empty and expecting it to remain available: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Not adding the page to the phone's home screen when a standalone app shortcut would be useful. [1]
Frequently asked questions
Is OperatorLink free for a rental yard?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a browser. [1] The yard can check the radios and phone browsers before the equipment leaves.
How does OperatorLink handle the STOP signal?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently: they stay on for everyone in the jobsite until the last person leaves. [1] The yard should confirm every crew member joined before the lift starts.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link shared for a morning shift may no longer open the session later the same day. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a later shift on a multi-day rental, start a new session and share the new link or QR code with the crew.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. The yard checks the sound and screen settings on every phone before the equipment leaves, so nobody on a full-shift rental misses the signal. A radio or hand signal stays ready as a fallback.
Can a rental crew talk on OperatorLink during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift