2Dig Plain comparisons of crane signalling and jobsite communication tools

Pass stop calls from the track to the crane cab

How railway maintenance crews pass stop calls from the track to the crane cab, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

To get a stop call from the track to the cab, the signal person and the crane operator open one jobsite in a phone browser, and one of them shares a link or QR code for the rest to join. [1] [1] A STOP press throws a full-screen alert up on every other phone in the session. [1] The phones must hold a live data signal, iPhone Safari will not buzz on alert, and an empty session is cleared after 3 hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To send a stop call from the track to the cab, button presses, chat and voice pass between phones in a browser. [1] The crew member who starts the jobsite passes out a link or QR code, and the track lookout plus the crane operator enter the same session from it. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] The page can be added to the phone's home screen as a standalone app. [1] Keep a two-way radio or hand signal in reserve, because a stop call depends on the phone's data signal.

Step by step

  1. Make sure each phone has a browser, because button presses, chat and voice pass between phones in a browser. [1]
  2. Let the crew member who starts the jobsite open the session from a phone browser; nothing has to be installed. [1]
  3. The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
  4. Check that the whole crew is in the session before moving the load, because it shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]
  5. Agree on the latched signals: HOLD and SLOW stay up for everyone in the jobsite and are cleared only when the last person leaves. [1]
  6. Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
  7. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  8. Send the one-tap calls Go Ahead, Copy That and All Clear as chat messages as the crew works. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]
  9. At the end of the shift everyone leaves, and note that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Keep a radio or hand signal agreed as a fallback in case a phone loses its data signal mid-shift.

Tools that can do it

OperatorLink is made by the team that publishes this site. It sends the STOP, HOLD and SLOW signals to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] No app has to be installed; everything runs in a browser. [1] The member who starts a jobsite hands out a link or QR code, and the crew joins from it. [1] The one-tap calls Go Ahead, Copy That and All Clear arrive as chat messages. [1] Anyone who has joined can join a voice call run from the phone browser. [1]

A phone video call app is another option. No facts here describe one, so check that the crew can keep the call live for the whole shift, that the track lookout's hands stay in view, and that the phone does not lock its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Pick the option that fits the crew and the site, and keep a fallback ready.

Common mistakes to avoid

Expecting every phone to alert the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Leaving the session empty and expecting the signals to survive to the next day: an empty jobsite is wiped after 3 idle hours. [1] Missing that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Not checking whether a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Overlooking that the app can be added to a phone's home screen as a standalone app. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew joins from the browser on a phone. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1]

What happens when the STOP button is pressed?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently: they stay on for everyone in the jobsite and are cleared when the last person leaves. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.

Does a STOP signal buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]

Can crew members talk by phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons