2Dig Plain comparisons of crane signalling and jobsite communication tools

How to Pass STOP and SLOW Calls to the Cab from a Tower

Learn how telecom tower crews can pass STOP and SLOW calls from the tower to the cab, prepare phones, compare communication options and check common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Passing STOP and SLOW calls from a telecom tower to the cab requires an agreed communication method and a clear understanding of what each signal means. Before work starts, confirm how the tower crew member and the cab operator will communicate, how the operator will acknowledge each call, and what everyone will do if communication is interrupted. OperatorLink is one option for showing STOP, HOLD and SLOW to the jobsite crew and passing button presses, chat and voice between phones in a browser. [1] [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appCheck whether the call can stay available during the job and whether the crew can acknowledge each call clearly.not publishednot published
Two-way radioCheck radio range, sound quality at the site and how the crew will acknowledge STOP and SLOW calls.not publishednot published

What you need before you start

Before work starts, agree on the communication method between the tower crew member and the cab operator. Confirm which calls mean STOP, HOLD and SLOW, how the operator will acknowledge each call, and what response is expected when a signal changes. Keep the agreed backup method available in case the main method stops working. If the crew uses OperatorLink, each person needs a phone with a working browser and data signal because button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] Decide how the crew will handle HOLD and SLOW, which remain on for everyone in the jobsite until the last person leaves. [1] [1] A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] If using OperatorLink, consider adding the page to the phone's home screen so it opens as a standalone app. [1]

Step by step

  1. Agree on the meaning of STOP, HOLD and SLOW before the tower crew member starts work. Make sure the cab operator knows how to acknowledge each call and what action to take.
  2. Choose the communication method that the tower crew and cab operator can use throughout the job. Keep a backup method available if the main method fails.
  3. If using OperatorLink, have the person starting the jobsite open it in a phone browser. No app install is needed. [1]
  4. That person shares the jobsite link or QR code with the tower crew and the cab operator, and each person joins from it. [1]
  5. Check that the required crew members have joined and can see the signals before work begins. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [1]
  6. Explain how STOP works before relying on the signals. Pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  7. Make sure everyone understands that HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]
  8. If using a move button, hold it while the move is needed. The move continues to be sent to the other phones while the button is held, and those phones drop it if it stops arriving for 2 seconds. [1]
  9. Use the agreed method to acknowledge calls from the tower to the cab. OperatorLink sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [1]
  10. If voice communication is needed, anyone who joins the OperatorLink jobsite can take part in a voice call run from the phone browser. [1]
  11. If a signal or call does not arrive, stop the planned movement and use the agreed backup communication method before continuing.
  12. When work ends, have everyone leave the OperatorLink jobsite. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] The jobsite link stops working 12 hours after the first person joins it. [1]

A phone video call app is another option to consider. The available facts do not describe a particular app, so check whether it can support clear communication between the tower and the cab, whether the crew can keep the call available during the job, and what happens if the phone loses its data connection.

A two-way radio is another option. The available facts do not describe a particular radio, so check the equipment range, sound quality at the site, channel arrangements and how the crew will acknowledge STOP and SLOW calls.

A further option is to use the agreed hand signals and voice procedures for the job. Confirm that the tower crew and cab operator understand the same calls and have a clear backup method if the main communication method stops working.

Before choosing, check which method the crew can use reliably at the actual site, how the cab operator acknowledges each call, and what everyone must do if communication is interrupted.

Common mistakes to avoid

Starting work before the tower crew and cab operator agree on what STOP and SLOW mean can lead to different interpretations of the same call. Agree on the signals and acknowledgements before the job begins. If using OperatorLink, remember that STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Assuming HOLD and SLOW clear automatically is another mistake, because they stay on for everyone in the jobsite until the last person leaves. [1] Do not assume that a move is still arriving: OperatorLink drops a move on the other phones if it stops arriving for 2 seconds. [1] Check the phones' data connections before starting because OperatorLink passes button presses, chat and voice between phones in a browser. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] A jobsite with nobody in it is wiped after 3 idle hours, and a jobsite link stops working 12 hours after the first person joins it. [1] [1] Agree on a backup method before work starts, and do not continue a planned movement when the crew cannot confirm that a call has arrived.

Frequently asked questions

Does OperatorLink cost anything to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser and passes button presses, chat and voice between phones. [1] The phones still need a working data signal for the communication to pass between them. Before starting, check the data connection at the tower and in the cab, and agree on a backup method if the connection stops working.

What does STOP do in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] The tower crew and cab operator should agree on the meaning of each signal before work begins. If a call is not received or acknowledged, use the agreed backup communication method before continuing.

When does an OperatorLink jobsite link expire?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a new jobsite and share its link or QR code with the crew. [1] Confirm that the tower crew and cab operator have joined the new jobsite before relying on its signals.

Does OperatorLink make every phone buzz for STOP?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] The crew should check how alerts appear on each phone before starting work. Agree on what the cab operator and tower crew member will do if a signal is not noticed or acknowledged, and keep the backup communication method ready.

Can OperatorLink pass voice calls from the tower to the cab?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Button presses, chat and voice pass between phones in a browser. [1] The tower crew and cab operator should agree on how calls will be acknowledged and what backup method to use if communication stops working.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons