How to pass signals between the trailer and the cab for heavy machinery movers
A trailer-to-cab signal setup for heavy machinery moves: what to have ready, the steps to follow, and the mistakes that cause delays.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To pass signals between the trailer and the cab, the person in the trailer and the driver each open the same session in a phone browser, and one of them shares a link or QR code. [1] [1] OperatorLink shows STOP, HOLD and SLOW to both phones. [1] Two other tool types are covered below, with what to check for each.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew, and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Each phone needs a web browser and a mobile data signal. [1] No app install is needed. [1] One person starts the session and shares a link or QR code, and the other person joins from it. [1] A link stops working 12 hours after the first person joins, so a link from an earlier move may no longer open the session. [1] Before the first move, agree which signals stay on, because HOLD and SLOW stay on for everyone until the last person leaves. [1] Add the page to the phone's home screen so it opens as a standalone app, and keep both phones charged for the whole move. [1] Finally, agree on a backup signal, such as a hand signal or a radio, in case a phone loses its data signal.
Step by step
- Agree on the signal words before the move starts, such as stop, hold and slow, and what each one asks the driver to do.
- Confirm the driver in the cab and the person in the trailer can each see the other before the first move.
- Name one person to send the signals so the driver knows whose signal to act on.
- Test each signal once while the load is still, and check that the driver responds.
- Keep each signal short, and repeat it if the driver does not respond.
- Stop the move and look again after any stop signal before moving on.
- Clear any hold or slow signal on purpose once the path is clear, and say so to the driver.
- At the end of the move, confirm everyone has left the session or radio channel, so nothing is left running for the next crew.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew, and passes button presses, chat and voice between phones in a browser. [1] Nobody needs to install an app; the page runs in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
A phone video call app is a second option. No facts here describe one, so check whether the call stays open for the whole move, whether the driver can see the signal person's hands, and whether the phone locks its screen during the move.
A two-way radio is a third option. No facts here describe one, so check that the team agrees on plain voice words, that the driver can hear over engine and road noise, and that the channel stays clear for the whole move.
Match the option to the crew and the site, and keep a fallback ready, since any phone signal can drop.
Common mistakes to avoid
Relying on one phone for the STOP signal. If that phone loses its data signal, keep a voice or hand signal ready as a backup. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Reusing an old link for a new move. A link stops working 12 hours after the first person joins. [1] Expecting a session to still be there the next day. A session with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives. If a held move stops arriving for 2 seconds, the other phones drop it. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew opens a link instead of downloading anything. [1] The phones still need a working data signal during the move, so check the data plan on each phone before the shift starts.
What does the STOP signal do in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so everyone sees it. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the session. [1] Agree before the move which signal each person will send, so nobody is caught off guard.
How long does an OperatorLink session stay usable?
A session link stops working 12 hours after the first person joins it. [1] A session with nobody in it is wiped after 3 idle hours. [1] For each new move, start a fresh session and share the new link or QR code, rather than reusing a link from an earlier shift.
Does OperatorLink make an iPhone buzz for STOP?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the full-screen alert on the screen is what to watch for. [1] Before the move, check the sound and screen settings on each phone so the signal is not missed.
Can OperatorLink carry voice between the trailer and the cab?
Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback for the whole move.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift