2Dig Plain comparisons of crane signalling and jobsite communication tools

How to pass signals from shaft bottom to the crane cab

How tunnel and shaft crews share lift signals between the shaft bottom and the crane cab, with the steps and tool choices.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

For a shaft lift, the signal person below and the crane operator above need a shared way to communicate before the load moves. OperatorLink lets the crew exchange STOP, HOLD and SLOW signals, button presses, chat messages and voice through phone browsers. [1] [1] The person opening the jobsite shares a link or QR code for others to join. [1] Before using this method, check the phone signal at both ends, agree on what each signal means, and keep a separate communication method available.

OptionWhat it doesFeeCard fee
OperatorLinkShares STOP, HOLD and SLOW signals, button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Start by checking the communication arrangements at the shaft bottom and inside the crane cab. Each person using OperatorLink needs a phone browser and a working data signal because button presses, chat and voice pass between phones through a browser. [1] The person opening the jobsite shares a joining link or QR code with the other crew members. [1] Links stop working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [1] [1] Agree on how HOLD and SLOW will be cleared, since both remain on for everyone until the last person leaves. [1] The page can be added to a phone's home screen for standalone access. [1] Also confirm how the crew will communicate if a phone loses its signal, and establish the agreed stop procedure before lifting starts.

Step by step

  1. Inspect the communication arrangements at both ends of the shaft. For OperatorLink, check that the phones have working browsers, since button presses, chat and voice pass between phones in a browser. [1]
  2. Ask one crew member to open a jobsite from a phone browser. OperatorLink does not require an app installation. [1]
  3. Have that person share the session link or QR code with the signal person, operator and any other crew members who need to join. [1]
  4. Check that the people who need to communicate have joined and understand the agreed signal meanings before the lift begins. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [1]
  5. Agree on how to handle HOLD and SLOW. Both signals stay active for everyone in the jobsite until the last person leaves. [1]
  6. When using a move button, keep it pressed while the move is needed. OperatorLink keeps sending that move to the other phones while it is held, and those phones drop it if it stops arriving for 2 seconds. [1]
  7. Make sure everyone understands the STOP response before the lift. Pressing STOP releases all held directions on every phone and displays a full-screen alert to everyone else. [1]
  8. Use agreed short calls when a quick confirmation is needed. OperatorLink sends one-tap calls such as Go Ahead, Copy That and All Clear as chat messages. [1]
  9. When voice communication is needed, anyone who has joined the jobsite can take part in a call through the phone browser. [1]
  10. Close out the session when the work is finished. An empty jobsite is wiped after 3 idle hours, so a later shift may need a new session. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It gives the shaft crew and crane operator a shared way to exchange STOP, HOLD and SLOW, button presses, chat and voice through phone browsers. [1] [1] The crew can use it without installing an app, and the person starting the jobsite distributes access through a link or QR code. [1] [1] The jobsite link expires 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [1] [1] STOP clears held directions and alerts the other phones, while HOLD and SLOW remain active until the last person leaves. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] OperatorLink is currently free to use, with no paid plan built yet. [1]

A phone video call app is another option to consider. Before choosing one, check whether it can keep the signal person and operator in contact during the lift, whether the view and sound work at both ends, and what happens if a phone screen locks.

A two-way radio is another possible way to communicate between the shaft bottom and cab. Check the available radio coverage, whether the crew can hear messages over the equipment, and whether everyone follows the same agreed call words. The available facts do not establish specific features or fees for either alternative, so confirm those details with the provider.

Choose the communication method after checking the conditions at both ends of the shaft. Keep a separate means of giving a stop instruction ready, and do not rely on a phone browser when its data signal is unavailable.

Common mistakes to avoid

Depending on a phone without checking its data signal can leave the crew without the shared signals. OperatorLink passes button presses, chat and voice between phones in a browser, so arrange another way to communicate if the connection is lost. [1] Treating alerts as identical on every device is another risk. Android browsers can buzz for signals such as STOP, but iPhone Safari ignores the buzz, so check how the alert appears on each phone. [1] Reusing an old session without checking its status can also cause trouble: links expire 12 hours after the first person joins, and empty jobsites are wiped after 3 idle hours. [1] [1] Remember that HOLD and SLOW remain active for everyone until the last person leaves the jobsite. [1] Do not assume a move is still reaching the other phones if the signal stops arriving. OperatorLink drops a move on the other phones if it stops arriving for 2 seconds. [1] Add the page to the phone's home screen if standalone access would help the crew open it. [1]

Frequently asked questions

Does OperatorLink cost anything to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The service passes signals, chat and voice between phones through a browser, so the phones need working data connections. [1] Check the connection at the shaft bottom and inside the cab before the lift, and arrange another communication method in case a phone loses service.

What does STOP do in OperatorLink?

Pressing STOP releases every held direction on all phones in the jobsite and puts a full-screen alert on the other phones. [1] HOLD and SLOW work differently because they remain active for everyone until the last person leaves. [1] Before lifting, agree on the response to each signal so the people below and in the cab understand what to do.

When does an OperatorLink session expire?

The joining link stops working 12 hours after the first person joins the jobsite. [1] If nobody remains in the jobsite, it is wiped after 3 idle hours. [1] For a later shift, check whether a new jobsite needs to be opened and share its link or QR code with the people at both ends of the shaft.

Does OperatorLink make every phone buzz for STOP?

On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz. [1] Check how the alert appears on the actual phones used by the crew before the lift. Make sure everyone knows where to look for the STOP alert, and keep another agreed way to communicate available.

Can OperatorLink carry voice calls between the shaft and cab?

Anyone who joins an OperatorLink jobsite can take part in a voice call through the phone browser. [1] The service also sends one-tap calls such as Go Ahead, Copy That and All Clear as chat messages. [1] Check that the phones have working data connections at both ends of the shaft, and keep a separate communication method ready if the connection fails.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons