2Dig Plain comparisons of crane signalling and jobsite communication tools

How to learn standard lift calls for apprentice riggers in 2026

Learn standard lift calls as an apprentice rigger with a practice routine, a short list of signals, and tools your crew can use to practice.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Learn standard lift calls by practicing each one out loud and by hand, with a qualified signal person watching, then repeat the drill until every call comes without hesitation. Start with the stop call, then the hold and slow calls, and keep a note of the calls you miss.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before you practice, get the list of lift calls your site and employer use, and ask a qualified signal person or instructor to show each one in person. Start with the calls that stop, hold and slow the load, since those matter most before any other call.

Choose a practice spot where nobody is working under the load, and where you can see the load, the crane operator and the signal person at the same time. Agree with your instructor which calls you will practice first, and bring a notebook to record the ones you miss.

If you practice with a phone, the phone needs a working browser and a data signal, because the signals travel between phones over the phone network. [1]

Step by step

  1. Get the list of calls your site uses and read what each one means.
  2. Learn the stop call first and practice reacting to it straight away.
  3. Practice the hold and slow calls next, then the move calls.
  4. Practice each call out loud and by hand, with a qualified signal person watching.
  5. Check that the operator and the rest of the crew respond the same way to each call.
  6. Repeat the drill on a regular schedule until each call comes without hesitation.
  7. Have a supervisor watch you signal during a supervised lift before you signal on your own.
  8. Keep a note of the calls you miss and go over them again at the next drill.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]

A phone video call app is a second option. Check whether the instructor can see your hands and the load on the screen, and whether the call stays open for the whole drill.

A two-way radio is a third option. Check that the crew uses the same plain wording on the channel, and that you can hear each call over the machine noise.

Match the option to your site and your crew, and keep a fallback ready, since phone-based signals depend on the phone's data signal.

Common mistakes to avoid

Memorizing the words without practicing the hand signals. Learn each call both out loud and by hand, because the operator may need to see the signal as well as hear it.

Practicing alone with nobody to watch you. Ask a qualified signal person to check each call, since a call you cannot see clearly on a real lift is a call that can go wrong.

If your crew uses OperatorLink, HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] A jobsite with nobody in it is wiped after 3 idle hours, so do not expect a session to hold its signals the next day. [1]

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before the drill. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Because it runs in a phone browser, the phone still needs a working data signal for the practice session, so check that before relying on it for a drill. No app install is needed. [1]

What does the STOP call do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] Practice reacting to it until you respond straight away. HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [1]

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new practice session, start the jobsite again and share the new link or QR code with the crew. [1]

Do OperatorLink alerts buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Check the sound and screen settings on every phone before a practice session, so nobody misses a call.

Can OperatorLink run a voice call for a practice crew?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Because the calls pass through a phone browser, a phone needs a working data signal to take part. [1] Keep a radio or hand signal practice as a fallback during training.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons