How to Keep Voice Contact With a Ground Spotter
Learn how mobile lift crews can keep voice contact with a ground spotter, check phone connections, share a jobsite and compare communication options.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To keep voice contact with a ground spotter, agree on how the crew will speak, check that each person can hear and reply, and choose a communication method before the lift. OperatorLink lets anyone who joins take part in a voice call through a phone browser, and it also passes button presses and chat between phones. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1] [1] | Currently free to use, with no paid plan built yet. [1] | not published |
| Phone voice call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Direct voice contact with an agreed backup | not published | not published | not published |
What you need before you start
Before moving a mobile work platform, agree on how the operator and ground spotter will speak during the job. Both people need to know who will give instructions, how the operator will reply, and what to do if speech becomes hard to hear. Check the chosen communication method at the worksite before movement begins.
If using phones, check that each phone has a working browser and data signal. OperatorLink passes voice, chat and button presses between phones in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
Agree on the words to use for ordinary instructions and urgent stops. If the crew uses OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]
Choose a backup communication method before work starts. Check that the ground spotter can reach the operator if the phone connection stops passing voice, and agree on how work will pause until contact is restored. Do not assume that a phone screen, voice call or alert will always be noticed.
Step by step
- Agree on who speaks and who replies. Before the platform moves, identify the ground spotter and operator. Decide how the spotter will give instructions and how the operator will confirm that each message was heard.
- Choose a way to communicate. Options include a phone voice call, a two-way radio, or a phone-based tool that carries voice and written signals. Compare how each option will work at the actual worksite. Check that both people can hear the chosen method over the surrounding noise.
- Check the connection before the lift. If using phones, confirm that each device has a working browser and data signal. OperatorLink passes button presses, chat and voice between phones in a browser, so the phones need a working connection for that communication. [1]
- Join the same jobsite if using OperatorLink. The person who starts a jobsite shares a link or QR code, and the operator and ground spotter join from it. [1] Confirm that both people have joined before starting the lift. The jobsite link stops working 12 hours after the first person joins it. [1]
- Try a short voice exchange. Have the spotter speak, then ask the operator to reply. Confirm that each person can hear the other and understands the agreed words. Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [1]
- Agree on urgent signals. If using OperatorLink, explain what STOP, HOLD and SLOW mean to the crew before work begins. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW remain on for everyone until the last person leaves the jobsite. [1]
- Keep messages short and confirm important instructions. Use clear words, avoid talking over another person, and ask for a repeat when a message is unclear. OperatorLink also sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [1]
- Pause if contact is lost. If the operator cannot hear or understand the spotter, stop the activity using the agreed site procedure. Re-establish contact and confirm that both people are ready before continuing. Keep the backup method available rather than relying on a single phone.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app because the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
Anyone who joins an OperatorLink jobsite can take part in a voice call from the phone browser. [1] The tool also sends one-tap radio-style calls as chat messages and provides STOP, HOLD and SLOW signals. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check how alerts appear on the actual phones used by the crew.
A phone voice call app is another option to consider. The available facts do not describe a particular call app, its features or its fees. Before choosing one, check whether the operator and spotter can speak and hear each other clearly at the worksite, whether the call can stay available for the required period, and what happens if the call disconnects.
A two-way radio is another option to consider for voice contact. The available facts do not establish the features, range or cost of any particular radio. Check that the operator and spotter can hear each other at the worksite and agree on a backup method if contact is interrupted.
Direct voice contact with an agreed backup is also worth planning as part of the work procedure. Decide what the crew will do if the primary communication method fails, and make sure everyone understands when work must pause. Choose the method based on the conditions at the site and the communication needs of the crew.
Common mistakes to avoid
Starting work before checking two-way contact. A person speaking is not enough if the other person cannot hear or reply. Check that the operator and ground spotter can exchange clear messages before the lift.
Using unclear instructions. Agree on plain words for movement, waiting and stopping. Ask for a repeat when an instruction is unclear instead of guessing what the other person meant.
Depending on a phone without checking its connection. OperatorLink passes voice, chat and button presses between phones in a browser. [1] Check the data signal before work and have a plan for what happens if contact is interrupted.
Assuming every phone alerts in the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the screen and alert behaviour on each phone before the lift.
Forgetting how signals remain active. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands this behaviour before using the signals.
Reusing an old jobsite link without checking it. An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] Share a fresh link or QR code when starting a new jobsite, and do not continue work until the crew has restored contact.
Leaving without a backup plan. If the primary method stops working, the crew needs an agreed way to pause work and re-establish communication. Decide on that procedure before the platform moves.
Things to check before you choose
Check whether the chosen method lets the operator and spotter speak and reply clearly at the worksite. Confirm what happens if the connection drops, how urgent instructions will be handled, and what backup method the crew will use.
For OperatorLink, check the phone browser and data signal, confirm that everyone can join the jobsite, and review how STOP, HOLD and SLOW behave. [1] [1] [1] Test the voice call and agree on a procedure for interrupted contact before work starts. [1]
Frequently asked questions
How can mobile lift crews keep voice contact with a ground spotter?
Agree on who gives instructions, how the operator confirms each message, and what to do if contact is interrupted. Check that the chosen method lets both people hear and reply clearly at the worksite. OperatorLink lets anyone who joins take part in a voice call through a phone browser. [1] Have a backup method ready before the platform moves.
Can OperatorLink carry voice calls between the operator and ground spotter?
Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [1] OperatorLink also passes button presses and chat between phones in a browser. [1] The crew should check the phone connection and confirm that both people can hear and reply before starting work.
Does OperatorLink need an app installed on the phone?
OperatorLink runs in a phone browser and does not require an app install. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] The page can also be added to a phone's home screen as a standalone app. [1]
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently because they stay on for everyone in the jobsite until the last person leaves. [1] Explain these behaviours to the crew before work begins and agree on what to do when a stop signal appears.
Does OperatorLink make phones buzz when the ground spotter sends STOP?
On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz. [1] Check the screen and alert behaviour on each phone before the lift, rather than assuming every crew member will receive the same type of alert. Keep the crew's agreed communication procedure in place if a phone alert is missed.
How long does an OperatorLink jobsite link remain active?
An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a fresh jobsite and share its link or QR code with the crew. [1]
Is OperatorLink free for mobile lift crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser, so the phone still needs a working data signal for communication. [1] Check the connection at the worksite and agree on a backup method before relying on a phone for voice contact.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift