2Dig Plain comparisons of crane signalling and jobsite communication tools

Voice contact with the ground crew at height for tower crews

How tower crews keep voice contact with the ground crew at height. What to have ready, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

To keep voice contact with the ground crew at height on a telecom tower, the crew joins one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] The phone needs a working data signal at height, iPhone Safari does not buzz on alert, and an idle session is wiped after 3 idle hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkRuns a voice call from a phone browser that anyone who joins can take part in, and sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages [1] [1]Currently free to use, no paid plan built yet [1]not published
Phone voice call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To keep voice contact with the ground crew, each member needs a phone with a working browser and a data signal, because voice passes over the phone network at the tower. [1] The person who starts the jobsite shares a link or QR code, and the rest of the ground crew joins from it. [1] A phone browser means nobody has to install an app before the climb. [1] Confirm who will speak from the top of the tower and who answers from the ground, so both ends have a phone in reach. If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a paused job may need a fresh session. [1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] Before the climb, add the page to the phone's home screen so it opens as a standalone app. [1] Check that each phone's screen stays awake and that its sound carries over wind and tools at height, and keep a radio or hand signal ready as a fallback if the data signal drops.

Step by step

  1. Check each phone has a working browser and a data signal for the whole climb, because voice passes between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session in a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the ground crew, and each member joins from it. [1]
  4. Confirm every ground crew member is in the session before the climb, because anyone who joins can take part in the voice call. [1]
  5. For short messages, use one-tap radio-style calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [1]
  6. Keep the phone's screen awake during the climb, and add the page to the home screen as a standalone app so it is easy to reopen. [1]
  7. When a move or a message does not arrive as expected while at height, confirm it by voice before continuing, and say it again so the ground crew responds.
  8. Agree at the start whether the session stays open through breaks, because a jobsite with nobody in it is wiped after 3 idle hours. [1]
  9. At the end of the shift everyone leaves the session, and remember that a jobsite that sits empty is wiped after 3 idle hours and that the link stops working 12 hours after the first person joins it. [1] [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It runs a voice call from a phone browser that anyone who joins can take part in, and it sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

A two-way radio is a second option. No facts here describe one, so check that a voice call can be heard at height against wind and machine noise, that every member is on the same channel, and that a spare battery is ready for the shift.

A phone voice call app is a third option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the climber's hands stay on the structure while talking, and whether the phone locks its screen mid-climb.

Match the option to the crew and the site, and keep a fallback ready, since voice in a browser depends on the phone's data signal.

Common mistakes to avoid

Relying on one phone for voice contact: if that phone's data signal drops, the rest of the crew does not hear it, so keep a radio or hand signal ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that the link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open the session. [1] Letting the phone go to sleep mid-climb; adding the page to the home screen as a standalone app helps the screen stay available. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Voice is carried through a phone browser, so the phone still needs a working data signal for the climb. Check the phone's data plan before relying on it, and keep a radio or hand signal as a fallback.

Can crew members talk over the phone during a climb?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice depends on the phone's data signal at height, so keep a radio or hand signal as a fallback for every shift.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only appear on screen. [1] Check the sound and screen settings on every phone in the crew before the climb so nobody misses the signal.

How does the crew join the same jobsite?

The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] No one installs an app, because the page runs in a phone browser. [1] Anyone who joins can take part in the voice call. [1] Confirm every member is in the session before the climb begins.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons