2Dig Plain comparisons of crane signalling and jobsite communication tools

Keep voice contact on marine cranes in wind and wave noise

How marine crane crews keep voice contact in wind and wave noise: what to have ready, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] Everyone joins one jobsite session in a phone browser. [1] HOLD and SLOW stay on until the last person leaves, and STOP shows a full-screen alert to everyone else. [1] [1] The phone needs a working data signal, Android phones buzz on STOP while iPhone Safari does not, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the whole crew, and sends button presses, chat and voice between their phones. [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh. [1] The app can be added to a phone's home screen as a standalone app. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]

Step by step

  1. Check each phone has a working browser, because the calls pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the rest of the crew, and each member joins from it. [1]
  4. Confirm every crew member is in the session before the lift begins, so each one hears or sees the same signals. [1]
  5. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
  6. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while watching the load. [1]
  7. Use one-tap radio-style calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages and are easier to read than speech in noise. [1]
  8. Anyone who joins can take part in a voice call run from the phone browser, so talk over the phone instead of shouting. [1]
  9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
  10. At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. Shows STOP, HOLD and SLOW to the whole crew, and sends button presses, chat and voice between their phones. [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the camera and screen can be watched in wind, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine and wave noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready.

Common mistakes to avoid

Relying on one phone for spoken commands: keep a radio or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a browser. [1] Check that the browser-based voice call meets the crew's needs, and keep a radio or hand signal as a fallback for the marine site.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite, so the crew clears them on purpose.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. A jobsite with nobody in it is wiped after 3 idle hours.

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal in the wind and wave noise.

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons