How to keep one channel for a film crane crew
How a film or studio crane crew can keep one shared channel for the whole set, with steps, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To keep one channel for the whole set crew, one person starts a session in a phone browser and the rest of the crew joins from a shared link or QR code. OperatorLink is one option that works this way. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]. Two other options are described below, with what to check for each.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before the first shift, the crew needs one agreed channel that every member can reach, and a clear list of who is on it.
Each crew member needs a phone with a working browser, because the signals pass between phones in a browser. [1] Decide who will start the session and who will hold the shared link or QR code, since the rest of the crew joins from it. [1]
Check that each phone's sound and screen settings let a signal be noticed on a busy set. Agree in advance which signals stay on for the whole crew, because HOLD and SLOW stay on for everyone until the last person leaves. [1]
Plan for a fresh session on each shift, since a jobsite link stops working 12 hours after the first person joins it. [1] Keep a backup way to pass signals ready, such as a radio, in case a phone loses its signal.
Step by step
- Choose one person to start the session and to hold the shared link or QR code.
- Have that person open the session from a phone browser, with no app install needed. [1]
- Share the link or QR code with the rest of the set crew, and have each member join from it. [1]
- Confirm every crew member is in the session before the first lift, so everyone is working from the same signals. [1]
- Agree on the signals that stay on. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
- Set a rule for moves. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1] Keep the button held while the move continues.
- Set a rule for STOP. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- Use one-tap calls for short messages such as Go Ahead, Copy That and All Clear. These are sent as chat messages. [1]
- If the crew needs to talk, anyone who joins can take part in a voice call run from the phone browser. [1]
- A session with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because it runs in the browser. [1] It is currently free to use, and no paid plan is built yet. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person stays in view of the operator, and whether the phone keeps its screen on during the lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that every member can be heard over machine and set noise, and that the channel stays clear through the lift.
Match the option to the crew and the set, and keep a fallback ready. Signals pass between phones in a browser. [1]
Common mistakes to avoid
Relying on one phone for STOP. As a general precaution, keep a voice or hand signal ready as well, so the crew has a second way to pass a stop.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz, so check sound and screen on every device. [1]
Leaving a session empty over a break and expecting it to be there later. A session with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
Not checking that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [1]
Letting the phone lock its screen during a lift. Add the page to the home screen as a standalone app. [1]
Frequently asked questions
Is OperatorLink free to use on a film set?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install needed. [1] Signals pass between phones in a browser. [1] Check each phone's data plan and the coverage on the set before relying on it, and keep a backup way to pass signals ready.
What does STOP do in OperatorLink on a film set?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. [1] HOLD and SLOW work differently. They stay on for everyone until the last person leaves the session. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Agree on who presses STOP and when, and check the sound and screen on every phone before the first lift.
How long does an OperatorLink session link stay active?
A session link stops working 12 hours after the first person joins it. [1] A session with nobody in it is wiped after 3 idle hours, so a session left empty over a long break may need to be started again. [1] As a general precaution, for each new shift start a session and share the new link or QR code with the crew, so nobody joins from an old link by mistake.
Can OperatorLink handle voice calls between crew members on a set?
Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice passes between phones in a browser. [1] As a general precaution, keep a radio or hand signal ready as a fallback for the set.
What happens to a held move signal in OperatorLink if the phone loses contact?
Holding a move button keeps sending that move to the other phones. [1] If the move stops arriving for 2 seconds, the other phones drop it, so the crew should not assume a move is still being shown. Before each move, confirm the other phones are still receiving the signal, and keep the button held while the move continues.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift