How to keep one channel for the bridge lift team
Steps for keeping one shared channel for the whole bridge lift team, with what to set up, a tool-neutral checklist and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
A bridge lift team keeps one channel by choosing one shared session that every crew member joins before the lift, agreeing in advance on who calls each signal, and checking that every phone keeps its connection for the whole shift. OperatorLink is one option that shows STOP, HOLD and SLOW to the crew in a phone browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
A bridge lift team needs one shared channel that every member can reach before the lift begins, so that everyone sees the same signals at the same time. Choose the person who will start the shared session and confirm they can share a link or QR code with the rest of the crew. [1] Button presses, chat and voice pass between phones in a browser. [1] Agree in advance which signals stay on for everyone, because HOLD and SLOW remain active until the last person leaves the session. [1] Keep a backup way to pass the same signals, such as a radio or hand signals, in case a phone drops off the network. Plan to start a fresh session for each shift, since an idle session is wiped after 3 idle hours. [1] Finally, add the page to each phone's home screen so it opens as a standalone app. [1]
Step by step
- Choose one channel for the whole lift team and confirm every crew member can open the session in a phone browser. [1]
- The person who starts the session opens it from a phone browser, which needs no app install. [1]
- That person shares the link or QR code with the crew, and each member joins from it. [1]
- Check that the crew has joined before the lift starts, so every phone shows the same STOP, HOLD and SLOW signals. [1]
- Agree on who calls HOLD and SLOW, since those signals stay on for everyone until the last person leaves. [1]
- During a move, hold the move button, because holding it keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it. [1]
- Use short calls such as Go Ahead, Copy That and All Clear for quick confirmations, since they are sent as chat messages. [1]
- Practice the STOP signal before the first lift, so the crew knows that STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- When STOP is given, pause and look before anyone moves again.
- At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] It runs in a phone browser with no app install. [1] Anyone who joins the session can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Note that the link stops working 12 hours after the first person joins, so check that the link is still open before the next shift. [1]
A phone video call app is a second option. No facts here describe one, so check whether the whole crew can stay on one call for the full lift, whether the signal person can be seen by everyone, and whether the phone locks its screen during the lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that every member can hear over machine noise, and that the channel stays clear for the length of the lift.
Match the option to the crew and the site, and keep a fallback ready, since browser-based signals depend on each phone's data signal.
Common mistakes to avoid
Relying on one phone for STOP: if that phone loses its data signal, the rest of the crew may not see the signal in time, so keep a voice or hand option ready.
Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the sound and screen on every phone before the lift.
Reusing an old link: a jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open. [1]
Expecting an empty session to hold until the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on until the last person leaves, so the crew has to know they are still active. [1]
Letting a phone's screen sleep during the lift: the home screen install gives the page a standalone app form, so check each phone's screen settings before the lift. [1]
Frequently asked questions
Is OperatorLink free to use for bridge crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser and needs no app install. [1] Test the session with the whole crew before the first lift, so everyone knows what the signals look like on their own phone.
Can OperatorLink keep the whole lift team on one channel?
OperatorLink runs one jobsite session that the crew joins from a shared link or QR code. [1] Each phone shows the same STOP, HOLD and SLOW signals, and button presses, chat and voice pass between phones in a browser. [1] Anyone who joins can take part in the voice call. [1] Whether that fits the lift depends on the phone signal at the site, so test it with the crew before the first lift.
What does the STOP signal do in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently, because they stay on for everyone in the jobsite and are cleared only when the last person leaves. [1] Crews should agree in advance on what each signal means and who is allowed to call it, since every phone in the session receives the same signals.
Do phones buzz for alerts in OperatorLink?
On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Because of this difference, the crew should not assume every phone gives the same alert. Check the sound and screen settings on every phone before the lift, so no one misses a STOP.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new shift, the person who starts the session should create a fresh session and share the new link or QR code with the crew. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift