2Dig Plain comparisons of crane signalling and jobsite communication tools

Keep many crews talking during a turnaround

How to keep several refinery turnaround crews talking during a busy turnaround, what to have ready, and common mistakes to avoid.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

During a busy turnaround, several refinery crews need to keep talking to one another through a long shift. [1] To keep them in contact, everyone joins one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] STOP releases every held direction and shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] The phones need a working data signal, iPhone Safari does not buzz on alert, and an idle session is wiped after 3 idle hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1]Currently free to use, no paid plan built yet. [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To keep many crews talking during a busy turnaround, each phone needs a working browser and a data signal, because the signals pass between phones in a browser. [1] [1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh. [1] A jobsite link stops working 12 hours after the first person joins it. [1] Agree on which signals stay on, because HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1] The page can be added to each phone's home screen to open as a standalone app. [1] Each crew member should know how to send a message or start a talk, because one-tap calls and voice run from the browser. [1] [1]

Step by step

  1. Check that each phone has a working browser, because the signals pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the crews, and each member joins from it. [1]
  4. Confirm every crew member is in the session before work begins, so each one sees the same signals. [1]
  5. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  6. Pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
  7. Use one-tap radio-style calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages, to keep the crews talking. [1]
  8. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  9. If anyone needs to talk, everyone in the session can take part in a voice call run from the phone browser, and the person who started the jobsite keeps the session shared. [1] [1]
  10. At the end of the shift, everyone leaves the session. Remember that a jobsite with nobody in it is wiped after 3 idle hours, and a link stops working 12 hours after the first person joins. [1] [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser, so several crews can keep talking in one session. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap calls go as chat messages and voice calls run from the browser, so crews talk without an app. [1] [1]

A phone video call app is a second option. No facts here describe one, so check whether the crews can keep the call open for the whole shift, whether each signal person's hands stay in view, and whether the phones lock their screens mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crews agree on plain voice, that every member can be heard over machine noise, and that the channel stays clear and separate for each crew.

Match the option to the crews and the site, and keep a fallback ready.

Common mistakes to avoid

Relying on one phone for the STOP signal: keep a voice or hand option ready as a fallback. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours, and a link stops working 12 hours after the first person joins. [1] [1] Forgetting that HOLD and SLOW stay on for everyone and are cleared when the last person leaves. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone go to sleep mid-lift; the page can be added to the home screen as a standalone app. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals pass through a phone browser, so each phone still needs a working data signal for the shift. Check the phone's data plan before relying on it across a long turnaround.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Keep a radio or hand signal as a fallback.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone and are cleared when the last person leaves the jobsite. [1]

Do alerts buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Check the sound and screen settings on every phone in the crew before the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons