2Dig Plain comparisons of crane signalling and jobsite communication tools

Keep maintenance and crane crews on one channel during a shutdown

Steps for plant shutdown coordinators to keep maintenance and crane crews on one shared channel, with what to check before choosing a tool.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Plant shutdown coordinators can keep maintenance crews and crane operators on one shared channel by choosing a tool that works on every phone, sharing one session link with the whole crew, and agreeing in advance on who watches the held signals. OperatorLink is one option that runs in a phone browser. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published
Shared team chat appnot publishednot publishednot published

What you need before you start

A plant shutdown coordinator who wants maintenance crews and crane operators on one shared channel needs a phone with a working browser and a data signal for the whole shutdown window, because the signals pass between phones in a browser. [1] Nobody needs to install an app for that. [1] Decide who will start the session, since that person shares a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open the session and a fresh one should be shared. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves, so check these signals before work resumes. [1] Before the first lift, have each crew member add the page to the phone's home screen so it opens as a standalone app. [1] Finally, agree on the short radio-style call words the crew will use, such as Go Ahead, Copy That and All Clear, so they are used the same way on every phone. [1]

Step by step

  1. Check that every phone has a working browser and a data signal for the whole shutdown window. [1]
  2. The person who starts the session opens it in a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the maintenance crews and crane operators, and each member joins from it. [1]
  4. Confirm every member is in the session before the first lift, so the crew can see the same STOP, HOLD and SLOW signals. [1]
  5. Confirm that everyone understands how HOLD and SLOW behave: both stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  6. Agree on how the move buttons are used: a held move keeps sending to the other phones, and if it stops arriving for 2 seconds, they drop it, so keep the button held through the full move. [1]
  7. Use one-tap calls such as Go Ahead, Copy That and All Clear for short messages, which are sent as chat messages. [1]
  8. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew pauses and looks before moving again. [1]
  9. At the end of the shutdown, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Anyone who joins can also take part in a voice call run from the phone browser. [1]

A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole shutdown, whether the signal person's hands stay in view, and whether the phone locks its screen during a lift.

A two-way radio is another option to consider. Check that every member can be heard over plant noise, that the crew agrees on plain voice calls, and that the channel stays clear through the lift.

A shared team chat app is a fourth option. No facts here describe one, so check whether it can show a stop signal to every phone at once and whether it runs in a phone browser.

Match the option to the crew and the site, and keep a fallback ready in case a phone loses its signal.

Common mistakes to avoid

Not checking how STOP appears on each phone: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before work begins. [1] Keep a voice or hand option ready in case a phone loses its data signal. Leaving the session empty and expecting it to be there the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on until the last person leaves, so a HOLD from an earlier move can still be showing. [1] Reusing an old link from a previous shift: a jobsite link stops working 12 hours after the first person joins it. [1] Assuming a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone sleep mid-lift: adding the page to the home screen lets it open as a standalone app, and the crew should still keep the screen awake during the lift. [1]

Frequently asked questions

Is OperatorLink free to use for plant shutdowns?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew's phones need a working browser and a data signal for the whole shutdown. [1] [1] Check the data plan on each phone before the shutdown starts, and make sure the phones are charged before the shift begins.

What happens when OperatorLink's STOP signal is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the rest of the crew sees it. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [1] Agree on the crew's response to a STOP before the first lift, so everyone pauses and looks before moving again.

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left empty during a long break may be gone when the crew returns. [1] For a new shift, start a session again and share the new link or QR code with the crew. [1]

Do OperatorLink STOP signals buzz every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift, so nobody relies on a buzz that will not come.

Can OperatorLink carry voice calls between crane operators and maintenance crews?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages instead. [1] Because voice runs in the browser, keep a radio or hand signal ready as a fallback in case a phone drops off.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons