How to keep lift crews connected for project managers
A project manager's plan for keeping a lift crew connected: what to have ready, the steps, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
A project manager keeps a lift crew connected by having one person start a jobsite session in a phone browser and sharing its link or QR code with the crew. [1] OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser, with no app install. [1] [1] It is currently free to use, and no paid plan is built yet. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Each crew member needs a phone with a working browser, because the signals pass between phones in a browser, so each phone needs a data signal for the whole shift. [1] Name one person to start the jobsite session and share its link or QR code, since the rest of the crew joins from that link. [1] Decide which signals the crew will rely on, because HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]
Plan around the timers too. A link stops working 12 hours after the first person joins, and a jobsite with nobody in it is wiped after 3 idle hours, so start a fresh session for each shift. [1] [1] Ask each crew member to add the page to their phone's home screen before the lift, so it opens as a standalone app. [1] Last, find out which phones run Android, because on Android browsers signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1]
Step by step
- Choose the signal tool before the shift and test it on every phone, since the crew needs the same signals on all of them.
- Have the person in charge open the session in a phone browser. OperatorLink needs no app install. [1]
- That person shares the link or QR code with the crew, and each member joins from it. [1]
- Confirm every crew member is in before the lift begins, so each phone shows the same signals. [1]
- Agree on which signals stay on. HOLD and SLOW stay on for everyone until the last person leaves. [1]
- Agree on the quick calls before the lift. In OperatorLink, one-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
- Hold a move button to keep that move going to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so check that each move still arrives. [1]
- When STOP is pressed, every held direction is released on every phone and everyone else sees a full-screen alert, so pause and look before moving again. [1]
- At the end of the shift, everyone leaves the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in a browser. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready, since signals in a browser depend on each phone's data signal. [1]
Common mistakes to avoid
Relying on one phone for the STOP signal: check that each phone has a working data signal, and keep a voice or hand option ready. [1] Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Reusing a link from an earlier shift: a link stops working 12 hours after the first person joins it. [1] Leaving an empty session: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so check what is still showing before moving. [1] A held move stops showing on the other phones if it stops arriving for 2 seconds. [1] Letting a phone sleep during the lift: check each phone's sleep setting before the shift starts.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] A project manager who sets up a session can start one from a phone browser with no app install. [1] Each phone still needs a working data signal for the shift, so check the phone's data plan before relying on it for a lift. [1]
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone in the jobsite until the last person leaves. [1] Agree with the crew before the lift which signal means what, and check that everyone sees the alert on their own phone.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] A link from an earlier shift may no longer open the session, so for a fresh shift, start a new session and share the new link or QR code with the crew. [1]
Do STOP signals buzz on every phone with OperatorLink?
Not on every phone. On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone, check the screen as well as the sound. [1] Before the lift, check whether each phone's screen and alert behavior let the crew notice STOP, including the difference between Android browsers and iPhone Safari. [1]
Can a lift crew talk by voice in OperatorLink?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on the phone's data signal, so keep a hand signal or a second way to talk as a fallback. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift