Keep all yard crews on one voice channel
Learn how warehouse and yard supervisors can bring crews into one phone browser session, share voice calls and messages, and compare communication options.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To keep all yard crews on one voice channel, the person starting a jobsite shares a link or QR code so the crews can join from their phone browsers. [1] Anyone who joins can take part in a voice call, and one-tap radio-style calls are sent as chat messages. [1] [1] A jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
What you need before you start
To keep all yard crews on one voice channel, use a phone browser where button presses, chat and voice pass between phones. [1] The person who starts the session shares a link or QR code, and the rest of the crews join from it. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] A jobsite link stops working 12 hours after the first person joins it, so a session meant for later needs a fresh link. [1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a stopped-shift session may need a fresh session. [1] Before the shift, add the page to one phone's home screen so it opens as a standalone app. [1]
Step by step
- Check that each phone can open a browser, where button presses, chat and voice pass between phones. [1]
- Have the person who starts the session open it from a phone browser, with no app install needed. [1]
- That person shares a link or QR code with each yard crew, and every member joins from it. [1]
- Agree on how crews will use the shared voice call and short messages, so everyone knows which communication method to use.
- Agree on how crews call out: one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
- Anyone who joins can take part in a voice call run from the phone browser. [1]
- When a move is being signalled, holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
- At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
A two-way radio is a second option. No facts here describe one, so check that the crews agree on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the shift.
A phone video call app is a third option. No facts here describe one, so check whether the crews can keep the call open for the whole shift, whether hands stay free, and whether the phone locks its screen mid-shift.
Match the option to the crews and the yard, and keep a fallback ready, since calls in a browser depend on the phone's data signal.
Common mistakes to avoid
Relying on one communication method without planning a fallback: check what other communication method is available if the chosen method cannot be used. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Reusing an old link: a jobsite link stops working 12 hours after the first person joins it, so a fresh shift needs a fresh link. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Not preparing the page for quick access: the page can be added to a phone's home screen as a standalone app. [1]
Frequently asked questions
Can OperatorLink keep all yard crews on one voice call?
Anyone who joins the session can take part in a voice call run from the phone browser, and crews join from a link or QR code that the person who starts the session shares. [1] [1] The page runs in a phone browser with no app install. [1] Check which other communication method is available as a fallback if the phone browser cannot be used.
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a browser. [1] Check that the phones can open the browser and that another communication method is available if needed.
How long does a session stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crews.
Can the crews send quick messages instead of full calls?
Yes. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] These messages give crews a way to send short callouts without speaking in a voice call. Button presses, chat and voice pass between phones in a browser. [1] Check whether short messages and voice calls cover the communication needs of the yard.
Do the crews need to install an app?
No. OperatorLink runs in a phone browser with no app install. [1] The page can be added to a phone's home screen so it opens as a standalone app. [1] Check that the phones can open the page in a browser and that the crew has another communication method available if needed.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift