How to keep a voice link to the crane operator at a pour zone
Steps for concrete pump operators to keep a voice link with the crane operator sharing the pour zone, with tool options and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Among the options below, OperatorLink runs a voice call from a phone browser, and anyone who joins can take part. [1] Set the session up before the pour starts and keep a radio or hand signal ready as a backup.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Button presses, chat and voice pass between phones in a browser. [1] The person who starts the session needs to share a link or QR code, and the crane operator and the rest of the crew join from it. [1] Agree on who starts the session before the day begins, since a link stops working 12 hours after the first person joins it. [1]
A jobsite with nobody in it is wiped after 3 idle hours, so a session left empty between phases of the pour may need to be started again. [1] Decide ahead of time which signals the crew will rely on, because HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Before the pour, add the page to the phone's home screen so it opens as a standalone app. [1]
Step by step
- Confirm that the pump operator and the crane operator can open the session on their phones.
- Have the person who starts the session open it from a phone browser. No app install is needed. [1]
- That person shares the link or QR code with the crane operator and the rest of the crew, and each one joins from it. [1]
- Anyone who joins can take part in a voice call run from the phone browser. [1]
- Agree on the short replies the crew will use, such as Go Ahead, Copy That and All Clear. One-tap calls like these are sent as chat messages. [1]
- Agree on which signals stay on for the pour. HOLD and SLOW stay on for everyone until the last person leaves. [1]
- Holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so keep watching the load while a move is in progress. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- At the end of the pour, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Keep a radio or hand signal ready as a backup for every step, in case a phone loses its connection.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
A phone video call app is a second option. Published details for this option are not available here, so check whether the call stays open for the whole pour, whether the pump operator can keep the phone screen available while watching the pour zone, and whether the call still works when the phone's connection is weak.
A two-way radio is a third option. Published details for this option are not available here, so check that every member can be heard over machine noise, that the crew agrees on the words it will use, and that the channel stays clear through the pour.
Match the option to the crew and the site, and keep a fallback ready in case a phone loses its connection.
Common mistakes to avoid
Relying on one phone for the STOP signal. If that phone loses its connection, the other phones may not show the signal, so keep a voice or hand option ready.
Assuming every phone alerts the same way. On Android browsers signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [1]
Reusing a session that sat empty. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so a signal set earlier in the pour may still be showing. [1]
Not confirming that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [1]
Sharing an old link. A link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1]
Counting on the phone screen to stay available. Adding the page to the home screen as a standalone app is one thing to check before the pour. [1]
Frequently asked questions
Is OperatorLink free to use for a concrete pour?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Taking part in the session happens in a phone browser, with no app install. [1] Check your own phone plan before the pour so the connection is not a surprise on the day. Keep a radio or hand signal ready as well.
What does pressing STOP do in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone until the last person leaves the jobsite. [1] The crew should still confirm each signal by voice or hand, so keep that as a backup.
Do STOP alerts buzz on every phone in OperatorLink?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz.
How long does an OperatorLink jobsite link keep working?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
Can everyone who joins talk on an OperatorLink voice call?
Anyone who joins can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal ready as a backup for the crane operator and the pump operator, in case a phone loses its connection.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift