How to keep a clear channel lifting from a rough-terrain cab
Steps for mobile crane operators to keep a clear channel while lifting from a rough-terrain cab, with tool options and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Keep a clear channel by agreeing on each signal before the lift, checking every phone's connection, and keeping a backup ready. OperatorLink is one option: it shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before the lift, every crew member needs a phone with a working browser and a data signal for the whole shift, since signals and calls travel between phones in a browser. [1] Agree on who gives each signal, who watches for it, and what each one means before anyone climbs into the cab. Decide which person will start the shared session, because that person shares a link or QR code, and the rest of the crew joins from it. [1] Have a backup ready, such as a radio or hand signals agreed in advance, so the lift does not rest on one phone alone. Check that each phone is charged and set to keep its screen on during the lift. If you use a phone browser tool, the page can also be added to a phone's home screen as a standalone app. [1]
Step by step
The steps below apply to any tool the crew chooses, so they describe the routine itself.
- Check that every phone has a charged battery and a working data signal before the crew leaves the yard.
- Agree on each signal before anyone starts: the stop, the hold, the slow, and each move call, and who gives each one.
- Start the shared session on one phone and send the join link or code to each crew member.
- Have each crew member confirm they have joined and can see the signals from their own spot, not only from the cab.
- Run a short test before the first lift: give one move call, then one stop, and have everyone confirm they saw it.
- During the lift, the signal person gives each signal in plain words and keeps eyes on the load.
- Hold a move signal only while the move is needed, and watch for it to stop arriving. If it stops, halt and call again.
- After any stop, pause, check the load and the area, and move again only when the signal person gives a clear go-ahead.
- At the end of the shift, everyone leaves the session, and the crew notes anything that went wrong with the signals.
If a phone drops out at any point, switch to the backup signal until that phone is back, and make sure the whole crew knows which signal is in use.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because it runs in the phone browser. [1] A STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] It is currently free to use, and no paid plan is built yet. [1]
A phone video call app is a second option. No facts for it are available here, so check whether the call stays connected for the whole shift, whether the signal person can keep the load in view while on the call, and whether the phone's screen locks mid-lift.
A two-way radio is a third option. No facts for it are available here, so check that the crew agrees on plain voice terms, that every member can be heard over machine noise, and that the channel stays clear through the whole lift.
Match the option to the crew and the site, and keep a fallback ready in case a phone loses its connection.
Common mistakes to avoid
Relying on one phone for the stop signal. If that phone loses its connection, the rest of the crew may not see the signal, so keep a voice or hand signal ready as well.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on each device before the lift. [1]
Reusing an old link. A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so a signal given earlier may still be showing when the crew thinks the lift is over. [1]
Letting a held move run on. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so the signal person should watch each move until it is released. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Because it runs in a phone browser, there is no app to install, so each crew member opens the session from a browser on their own phone. [1] Before relying on it for a shift, check that each phone has a working data signal and a battery that lasts the whole lift.
What happens when OperatorLink's STOP signal is pressed?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1] After any STOP, the crew should pause, check the load and the area, and wait for a clear go-ahead from the signal person before moving again.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left empty over a break may need to be started again. [1] For a new shift, the person who starts the session shares a fresh link or QR code with the crew. [1]
Do OperatorLink signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the crew should watch the screen for the full-screen alert that STOP shows. [1] Check the sound and screen settings on every phone before the lift begins, so nobody misses a signal.
Can OperatorLink handle voice calls between crew phones?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages instead. [1] Keep a radio or hand signal as a fallback in case a call cannot be heard clearly over engine noise on the site.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift