Keep a clear channel for gantry crane operators in noisy halls
Keep a clear channel for gantry crane operators in a noisy hall: ready checks, step-by-step, tool choices and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To keep a clear channel for gantry crane operators in a noisy manufacturing hall, the crew picks one channel everyone can hear and agrees the signals before the lift. OperatorLink passes button presses, chat and voice between phones in a phone browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
To keep a clear channel for gantry crane operators in a noisy manufacturing hall, the crew needs a channel everyone can hear and a fallback when it drops. Check the sound on each phone or radio with the hall machines running, before the lift. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Button presses, chat and voice pass between phones in a browser. [1] On Android browsers signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] The app can be added to a phone's home screen as a standalone app. [1]
Step by step
- Map every crew position and note the noise around each one, because a clear channel has to reach the operator and every ground signal person no matter where they stand along the hall.
- Pick one channel everyone can hear before the lift starts, and test it with the machines running, since hall noise changes as different equipment powers up and down.
- Set the volume and alert sound on each phone or radio, and have each crew member confirm out loud that they can hear and see the signal.
- Check each phone has a working browser, because button presses, chat and voice pass between phones in a browser. [1]
- Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the ground crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the lift begins, so each one sees the same signals. [1]
- Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
- Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- Keep a voice or hand fallback ready through the lift, because any phone or radio signal can drop in a busy hall, and the crew needs a second way to reach the operator.
- At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it, and the link stops working 12 hours after the first person joins it. [1] [1] When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, so common directions do not need a spoken reply over the machine noise. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The app can be added to a phone's home screen as a standalone app. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
A two-way radio is a third option. Check that the crew agrees on plain voice and that every member can be heard over the machines.
Match the option to the crew and the hall, and keep a fallback ready.
Common mistakes to avoid
Relying on one phone for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Testing the channel only when the hall is quiet; a clear channel must be tested with the machines running. Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting a phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Check that each phone has a working data signal for the whole shift, and keep a radio or hand signal ready in a noisy hall.
What happens when the STOP button is pressed?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone in the crew, with the hall machines running.
Can crew members talk over the phone during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback in a noisy hall.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift