Hear stop calls from the signal person for tag line handlers
A practical guide to hearing stop calls from the signal person, with setup steps, tool choices and checks before the lift.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Tag line handlers can hear stop calls through a jobsite session in a phone browser when the signal person shares a link or QR code. [1] [1] STOP releases held directions and puts a full-screen alert on the other phones. [1] HOLD and SLOW remain on for everyone until the last person leaves. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW and passes button presses, chat and voice between phones in a browser [1] | Currently free to use [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Each handler needs a phone that can open a browser and has a working data signal for the session. [1] The signal person starts the jobsite and sends the joining link or QR code to the handlers. [1] A jobsite with nobody in it is wiped after 3 idle hours, so check that an old session has not been left empty. [1] HOLD and SLOW remain active for everyone until the last person leaves, so make sure the crew understands when those signals clear. [1] The app can also be added to a phone's home screen as a standalone app. [1]
Step by step
- Put a working browser and data signal on each phone that needs to receive the stop call. [1]
- Have the signal person start the jobsite in a phone browser. No app install is needed. [1]
- Get the joining link or QR code from the person who started the jobsite, then open it on each handler's phone. [1]
- Check that the handlers have joined before the lift starts, since the jobsite passes button presses, chat and voice between phones. [1] [1]
- Make sure the crew knows that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1]
- If a move button is being used, keep holding it while that move is needed. The other phones drop the move when it stops arriving for 2 seconds. [1]
- When the signal person presses STOP, every held direction is released on every phone and the other phones show a full-screen alert. [1]
- Use one-tap calls such as Go Ahead, Copy That and All Clear when a short call needs to be sent as chat. [1]
- A person who has joined can take part in the voice call from the phone browser. [1]
- When the work is finished, have everyone leave the jobsite. An empty jobsite is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It puts STOP, HOLD and SLOW on the jobsite phones and carries button presses, chat and voice between them through a phone browser. [1] [1] It runs in the browser without an app install. [1] The jobsite is joined through a link or QR code shared by the person who starts it. [1]
A phone video call app is another option. No facts here describe one, so check whether its call can stay open for the shift and whether the signal person remains visible to the handlers.
A two-way radio is another option. No facts here describe one, so check whether its voice reaches every handler and whether the crew can hear it around the equipment.
For any option, check how the signal person will send the stop call and how the tag line handlers will receive it before the lift.
Common mistakes to avoid
Do not assume every phone gives the same alert. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Do not leave an old jobsite empty and expect it to remain available, because an empty jobsite is wiped after 3 idle hours. [1] Remember that HOLD and SLOW remain on for everyone until the last person leaves. [1] If a move stops arriving for 2 seconds, the other phones drop it, so check that the needed move is still being sent. [1] The app can be added to a phone's home screen as a standalone app. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use. [1] It runs in a phone browser, so the phone needs a working data signal for the jobsite session. [1]
What happens when the STOP button is pressed?
STOP releases every held direction on every phone and puts a full-screen alert on the other phones. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1]
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] An empty jobsite is wiped after 3 idle hours. [1] When a new jobsite is needed, the person starting it shares its link or QR code with the crew. [1]
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so the iPhone user sees the alert on screen instead. [1] Check each phone before the lift so the handler knows how the alert appears.
Can tag line handlers talk over the phone during a lift?
Anyone who joins can take part in a voice call from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift