How to guide pool shells over buildings and fences
Steps for swimming pool installers to guide a pool shell over buildings and fences, with what to prepare, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Pool installers guide a pool shell over buildings and fences with a clear route, one signal person in view, and agreed signals the whole crew understands. OperatorLink is one option for passing STOP, HOLD and SLOW between phones in a browser [1].
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before any shell moves, the crew needs a plan for the whole lift: the route over the building or fence, the height that must clear, and the spot where the shell is set down.
One person should act as the signal person, with a clear view of the shell and the path, and the rest of the crew should know who that person is. Agree on the signals for STOP, HOLD and SLOW before the lift starts, so nobody has to guess what a signal means. Keep the lift gear, straps and tag lines checked and ready.
If the crew uses phones to pass signals, each phone needs a working browser and a data signal for the whole job. Button presses and signals pass between phones in a browser. [1] The person who starts the jobsite session shares a link or QR code, and the rest of the crew joins from it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] The app can be added to a phone's home screen as a standalone app. [1]
Step by step
- Walk the route over the building or fence before the lift and mark the clear height on the plan.
- Set one signal person in view of the shell and the path, and confirm the rest of the crew knows who that is.
- OperatorLink runs in a phone browser with no app install. [1]
- That person shares the link or QR code, and each crew member joins from it. [1]
- Confirm every phone has joined the session before the lift, and check that the session shows STOP, HOLD and SLOW on each phone. [1]
- Agree on the holding signals. HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
- Keep a move button held while the shell moves. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
- When STOP is pressed, every held direction is released on every phone, and everyone else sees a full-screen alert. Stop, look at the path and the load, and only then move again. [1]
- After the lift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Repeat the check each time the shell changes position.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] It runs in a phone browser with no app install. [1] For quick messages during a lift, one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can also take part in a voice call run from the phone browser. [1]
A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole shift and whether the phone locks its screen during the lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over site noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready for the browser option. [1]
Common mistakes to avoid
Relying on one phone for the STOP signal. Keep a voice or hand signal ready as a backup.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]
Reusing an old session. A jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours, so start a new session for each shift. [1] [1]
Forgetting that HOLD and SLOW stay on until the last person leaves, so the crew has to clear them on purpose. [1]
Not confirming that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [1]
Letting a phone lock its screen during the lift. Check that each phone stays awake and opens the session before the shell moves.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a phone browser. [1] Keep a backup way to pass signals ready for the shift.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone in the jobsite and are cleared only when the last person leaves. [1] Because of this, the crew should agree before the lift on how each signal is cleared, so nobody is left guessing what is still on.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new shift, start a fresh session and share the new link or QR code with the crew.
Do STOP signals make every phone buzz in OperatorLink?
No, not on every phone. On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, but STOP still shows a full-screen alert to everyone else in the session. [1] Before the lift, check the sound and screen on every phone in the crew, and make sure everyone knows which signal to watch for.
Can the crew talk during a lift with OperatorLink?
Yes, through quick messages and voice. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins the session can also take part in a voice call run from the phone browser. [1] Voice depends on each phone's data signal, so keep a radio or hand signal ready as a fallback. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift