2Dig Plain comparisons of crane signalling and jobsite communication tools

How to guide glass panels into place with the operator

How glazing and curtain wall installers guide glass panels into place with a crane operator, using a shared phone session for STOP, HOLD and SLOW.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

To guide a glass panel into place, the installer and the operator join one shared jobsite on phones, with someone sharing a link or QR code. [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To guide a glass panel into place with the operator, the installer uses a phone browser. Button presses, chat and voice pass between phones in a browser. [1] Someone on the crew starts the jobsite and shares a link or QR code, and the rest of the crew joins from it. [1] A link stops working 12 hours after the first person joins, so a link from an earlier shift may not open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours, so start it fresh when work resumes after a long stop. [1] Decide who will watch the HOLD and SLOW signals, because those two stay on for everyone until the last person leaves the jobsite. [1] Before the lift, add the page to the phone's home screen so it opens as a standalone app. [1]

Step by step

  1. Check that each crew member has a phone with a browser for the whole shift. Button presses, chat and voice pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open it in a phone browser. Nothing needs to be installed. [1]
  3. That person shares the link or QR code, and each crew member joins from it. [1]
  4. Before the panel leaves the ground, confirm that everyone has joined, so each phone shows the same signals. [1]
  5. Agree on how HOLD and SLOW will be cleared. They stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
  6. Hold the move button while the panel travels. The move keeps going to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep watching the panel's direction. [1]
  7. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  8. For short messages, tap Go Ahead, Copy That or All Clear, which go out as chat messages. [1]
  9. At the end of the shift, everyone leaves the jobsite, and a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] The page runs in the browser, so no app install is needed. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1]

A phone video call app is another route. Nothing in the material for this page describes how one works, so before choosing it, check whether the installer can keep the call open for the whole lift, whether the operator can see the installer's hands, and whether the phone locks its screen mid-lift.

A two-way radio is a third route. Nothing in the material for this page describes one either, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the whole lift.

Match the option to the crew and the site, and keep a fallback ready.

Common mistakes to avoid

Leaning on one phone for every signal. Button presses, chat and voice pass between phones in a browser, so keep a voice or hand option ready in case a phone drops out. [1] Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving a jobsite empty and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Assuming a move still arrives after the button is pressed. If a move stops arriving for 2 seconds, the other phones drop it. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a browser. [1]

What happens when OperatorLink's STOP button is pressed?

STOP releases every held direction on every phone in the jobsite. [1] Everyone else sees a full-screen alert on their phone. [1] HOLD and SLOW work differently, since they stay on for everyone until the last person leaves the jobsite. [1]

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, the person who starts the jobsite can open a new session and share the new link or QR code with the crew. [1]

Do OperatorLink STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.

Can OperatorLink be used for voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Button presses, chat and voice pass between phones in a browser, so keep a radio or hand signal as a fallback. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons