2Dig Plain comparisons of crane signalling and jobsite communication tools

How to guide crane-carried ladles to pouring stations

Steps for guiding crane-carried ladles to pouring stations in foundry pours, with what to prepare, tool options and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Foundry pouring crews guide a crane-carried ladle to its station by agreeing on one signal person, clear signals for stop, hold and slow, and a clear route before the lift begins. OperatorLink can show STOP, HOLD and SLOW to the crew on phone browsers [1].

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before a ladle moves, the crew needs a clear route from the holding area to each pouring station, with people kept out of the swing path. The crane operator needs a clear view of the signal person, and the signal person needs a clear view of both the ladle and the station.

Agree on one signal person for each lift, so the crane receives one set of instructions. Decide what stop, hold and slow mean before the first lift, and make sure every crew member knows them.

Have a fallback ready, such as hand signals or a radio, in case a phone or its screen fails. Button presses, chat and voice pass between phones in a browser [1]. The person who starts the jobsite session shares a link or QR code, and each crew member joins from it [1].

Step by step

  1. Walk the route with the crew before the lift and move anyone who does not need to be in the swing path out of it.
  2. Confirm the ladle is rigged and that the crane operator and signal person both know the destination station.
  3. Place one signal person where both the ladle and the station are in view, and keep that person out of the load path.
  4. Repeat the stop, hold and slow signals to the whole crew so everyone knows what each one means.
  5. Lift the ladle only after the signal person confirms the route is clear.
  6. Move the ladle slowly as it nears the pouring station, and use slow before the final approach.
  7. Hold the ladle at the station until the pour is set, and only then continue.
  8. After the pour, clear the signals and confirm the route is clear before the next move.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1] [1]. Nobody needs to install an app, because the page runs in a browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1].

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready. Button presses, chat and voice pass between phones in a browser [1].

Common mistakes to avoid

Relying on one phone for the STOP signal. Check each phone's connection before the lift, and keep a voice or hand signal ready.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check sound and screen on every phone [1].

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1].

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite [1].

Assuming a move is still arriving. If a held move stops arriving for 2 seconds, the other phones drop it, so the crew should confirm each move still shows [1].

Letting the phone go to sleep during a lift. Add the page to the home screen before the shift, since it can be added there as a standalone app [1].

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [1]. The page runs in a phone browser with no app install [1]. Button presses, chat and voice pass between phones in a browser [1].

What does the STOP signal do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else [1]. HOLD and SLOW behave differently, because they stay on for everyone in the jobsite and are cleared only when the last person leaves [1]. Crew members should learn what each signal means before the first lift. Check sound and screen alerts on every phone as well, since iPhone Safari ignores the buzz [1].

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts the session shares a link or QR code, and the crew joins from it [1]. For a new shift, start a fresh session and share its new link or QR code with the crew so everyone joins the current jobsite.

Can OperatorLink be used for voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser [1]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. Voice passes between phones in a browser [1]. Keep a radio or hand signal as a fallback. Before the lift, practice the voice call and the quick calls with the whole crew so each member knows how to answer them.

Does OperatorLink work on both iPhone and Android phones?

OperatorLink runs in a phone browser, with no app install [1]. Button presses, chat and voice pass between phones in a browser [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so the crew should check sound and screen on each phone [1]. The page can also be added to a phone's home screen as a standalone app [1].

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons