How crane service technicians fix field connection problems
Steps for crane service technicians to diagnose and fix connection problems on a jobsite, with the tools that can help and mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Start by checking that each phone has a working browser and a data signal, because signals pass between phones in a browser. [1] If the crew cannot rejoin, the link may have expired, since a jobsite link stops working 12 hours after the first person joins it. [1] Start a fresh session and share the new link or QR code with the crew. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before the work starts, give each technician a phone with a working browser and a data signal, since OperatorLink passes signals between phones in a browser. [1] Test the signal at the spot where the work happens, not only at the truck, and note any place where it drops.
Choose the person who will start the session. That person shares the link or QR code, and the rest of the team joins from it. [1] Have the link or code ready to send before the crew moves into position.
If the crew has been away, plan to start a fresh session, because a jobsite with nobody in it is wiped after 3 idle hours. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so decide in advance how each person will confirm an alert. [1]
Finally, keep a radio or hand signal ready as a fallback, so the work can continue if a phone's connection fails.
Step by step
Work through these steps in order, and stop at the first one that fails, since the later steps depend on it.
- Walk to the spot where the crew stands, and confirm each phone has a working data signal and an open browser or app.
- Ask one person to close and reopen the session, so each phone reconnects to the same jobsite.
- If the session will not reopen, start a new one rather than reusing an old link, because links and sessions can expire.
- Share the new link or code with every crew member, and ask each person to confirm they have joined.
- Send a test chat message or button press from one phone, and confirm every other phone shows it.
- Agree in advance who can send STOP, and confirm the alert reaches every phone before work resumes.
- When the work is finished, have everyone leave the session, and confirm that any hold or slow signal has cleared.
Keep a note of which step fixed the problem, so the same fix can be used on the next site.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] It runs in a browser with no app install needed. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]
Voice and quick calls are part of the same session. Anyone who joins can take part in a voice call run from the phone browser, [1] and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
A phone video call app is a second option. The page has no published facts on a phone video call app. Questions to ask before choosing one: can the call stay open for the whole shift, and does the connection hold at the site?
A two-way radio is a third option. The page has no published facts on two-way radios. Questions to ask before choosing one: does the crew agree on plain voice calls, can every member be heard over machine noise, and does the channel stay clear through the lift?
Match the option to the crew and the site. Button presses, chat and voice pass between phones in a browser. [1]
Common mistakes to avoid
Relying on one phone to carry the STOP signal is a common error. Signals pass between phones in a browser, so keep a voice or hand fallback ready for when a phone's data signal is weak. [1]
Assuming every phone alerts the same way is another. On Android browsers signals make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [1]
Leaving a session empty and expecting it to be there the next day is a mistake, because a jobsite with nobody in it is wiped after 3 idle hours. [1] Treating an old link as permanent causes the same problem, since a jobsite link stops working 12 hours after the first person joins it. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves can leave the crew working from an old signal. [1] Not confirming that a held move still arrives is also a risk: if a move stops arriving for 2 seconds, the other phones drop it. [1] Adding the page to a phone's home screen as a standalone app makes it quicker to reopen during the job. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so each phone still needs a working data signal for the whole shift. [1] [1] Check the data plans and coverage at the site before relying on it, so the crew is not caught out mid-lift.
What happens on every phone when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Before the lift begins, make sure the crew knows which signal is which, and practice the STOP check during the fix steps.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]
Does OperatorLink buzz every phone for alerts?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may need to be seen on the screen. Check the sound and screen settings on every phone in the crew before the lift, so nobody misses a signal. Do not rely on the buzz alone, and agree on a backup way to get each person's attention.
Can OperatorLink be used for voice calls on a crane site?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice runs through the phone's browser and data signal, so keep a radio or hand signal as a fallback in case the call drops. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift