2Dig Plain comparisons of crane signalling and jobsite communication tools

How to direct roofing material lifts to landing areas in 2026

Steps for roofing crews to direct material lifts to landing areas, with what to have ready, tool options and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Roofing crews can direct material lifts to landing areas with one named signal person, signals agreed before the first load, and a backup for every signal. OperatorLink is one option that shows STOP, HOLD and SLOW to the crew on phones in a browser. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before the first load goes up, name one signal person for the lift and tell the whole crew who that is. That person needs a clear view of the lift and the landing area, and the crew at the landing area needs to know what each signal means before work starts. Agree on the signals in advance: stop, hold, slow, and what each one asks the crew to do.

Button presses, chat and voice pass between phones in a browser, so each phone needs a working browser. [1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [1] A session with nobody in it is wiped after 3 idle hours, so start it at the beginning of the shift rather than the day before. [1] A jobsite link also stops working 12 hours after the first person joins it, so a link from an earlier day may not open the session. [1]

Add the page to each phone's home screen so it opens as a standalone app. [1] Finally, keep a backup for every signal, such as a radio or hand signals, because a phone signal can drop at any time.

Step by step

  1. Walk the path from the lift to the landing area and clear anyone who does not need to be there.
  2. Name one signal person for the lift and tell the crew who that is.
  3. Agree on the signals before the first load: stop, hold, slow, and what each one means in practice.
  4. Confirm each crew member can see or hear the signals from their spot at the landing area.
  5. Check that the signal person can see the lift and the landing spot at the same time.
  6. Give the go-ahead only when the landing crew confirms the area is clear.
  7. Send the load slowly, and keep the signal steady so the crew can follow it.
  8. When anyone gives a stop, halt the lift and wait for the signal person to confirm before moving again.
  9. Once the load lands, confirm it is clear of the path before releasing the lift.
  10. At the end of the shift, confirm the backup signal still works and close out the session or radio channel.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the phone browser. [1] The person who starts a session shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can also take part in a voice call run from the browser. [1]

A phone video call app is a second option. This page has no details on the phone video call app, so check whether the crew can keep the call open for the whole shift, whether the signal person can stay in view of the lift and the landing area, and whether the phone locks its screen during the lift.

A two-way radio is a third option. This page has no details on one, so check that every crew member can be heard over the noise on the roof, that the crew agrees on plain voice calls, and that the channel stays clear for the whole lift.

Match the option to the crew and the site, and keep a fallback ready.

Common mistakes to avoid

Relying on one phone for the stop signal is risky, so keep a voice or hand option ready.

Assuming every phone alerts the same way causes missed signals. In OperatorLink, signals such as STOP make an Android phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before work starts. [1]

Leaving a session empty and expecting it to hold signals the next day is a mistake, because a jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves can leave a signal on after the crew has moved on. [1]

Releasing a move button and assuming the move is still going is another mistake. Holding a button keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it. [1]

Frequently asked questions

Is OperatorLink free to use for roofing crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses, chat and voice pass between phones in a browser. [1] Check each crew member's data plan before relying on it, and keep a radio or hand signal ready as a fallback.

What does the STOP signal do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently, since they stay on for everyone until the last person leaves the jobsite. [1] Keep a voice or hand signal ready as well.

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a new session and share the new link or QR code with the crew before work begins.

Do OperatorLink STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Agree on a backup signal before work starts so the crew knows what to use. Check the sound and screen settings on every phone before the lift, so nobody misses a signal.

Can OperatorLink handle voice calls during a roofing lift?

Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Button presses, chat and voice pass between phones in a browser. [1] Keep a radio or hand signal as a fallback for the whole shift.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons