How to direct grab and bucket moves with the floor crew
Direct grab and bucket moves with the floor crew from a phone browser. What to have ready, the steps, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To direct grab and bucket moves with the floor crew, everyone joins one session in a phone browser, and the person running it shares a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] Check the alert settings on every phone before the first move.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Bulk material handlers directing grab and bucket moves need a phone with a working browser and a data signal for the whole shift, since the signals pass between phones in a browser. [1] The person who opens the session shares a link or QR code, and each floor crew member joins from it. [1] Decide who will watch the phone that shows HOLD and SLOW, because those two signals stay on for everyone until the last person leaves the site. [1] A session with nobody in it is wiped after 3 idle hours, so start a fresh one for each shift. [1] A link stops working 12 hours after the first person joins, so a link from an earlier shift may not open. [1] Before the first move, add the page to each phone's home screen so it opens as a standalone app. [1]
Step by step
- Check that each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1]
- The person running the session opens it from a phone browser. No app install is needed. [1]
- That person shares the link or QR code, and each floor crew member joins from it. [1]
- Confirm every crew member is in the session before the first move, so each person sees the same signals. [1]
- Agree before the shift on the words the crew will use for each move, and use the one-tap calls Go Ahead, Copy That and All Clear for quick replies. [1]
- Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. Keep the button held only while the move continues. [1]
- Confirm each move still shows on every phone before the grab or bucket comes closer to the crew.
- If anyone sees a problem, press STOP. It releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- When the shift ends, everyone leaves the session. A session with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the browser. [1] Anyone who joins the session can take part in a voice call run from the phone browser. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the alerts on each phone. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
No facts here describe a phone video call app, so check whether the crew can keep the call open for the whole shift, whether the person watching the grab and bucket can see the floor crew at all times, and whether the phone locks its screen during a move.
No facts here describe a two-way radio, so check that the crew agrees on plain voice calls, that every member can be heard over the noise of the machines, and that the channel stays clear for the whole move.
Match the option to the crew and the site, and keep a fallback ready for any option you choose.
Common mistakes to avoid
Relying on one device for STOP. If that device drops out, nothing else covers for it, so keep a voice or hand signal ready too.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and the screen on every device. [1]
Leaving a session empty and expecting it to be there the next shift. A session with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so a signal may still be showing after the move has ended. [1]
Reusing a link from an earlier shift. A link stops working 12 hours after the first person joins it. [1]
Letting go of a button while the move is still needed. Holding a move button keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it. [1]
Letting the phone sleep during a move. Adding the page to the home screen opens it as a standalone app. [1] Check each phone's screen settings before the first move so the screen stays on.
Frequently asked questions
Is OperatorLink free to use for bulk material handlers?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The page runs in a phone browser, so each phone still needs a working data signal for the whole shift. [1] No app install is needed. [1] Check the phone's data plan with the phone provider before relying on it for a full shift.
What does the STOP button do in OperatorLink during a move?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the site. [1] Both signals are shown to the whole crew, so every floor crew member sees the same change. [1]
How long does an OperatorLink session link stay active?
A link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A session with nobody in it is wiped after 3 idle hours. [1] Start a new session at the start of each shift, and share the new link or QR code with the crew. [1]
Do OperatorLink alerts buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so an iPhone may only show the alert on screen. [1] Check the sound and screen settings on every phone in the crew before the first move so nobody misses a signal.
Can crew members talk during a grab and bucket move with OperatorLink?
Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice and chat both pass between phones in a browser, so keep a radio or hand signal as a fallback for the whole shift. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift