Coordinate Truss and Lighting Hoists with the Operator
Learn how stage rigging crews can coordinate truss and lighting hoists with the motor operator, prepare signals, choose communication tools and avoid mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To coordinate truss and lighting hoists with the motor operator, agree on the movement plan, identify who can give a signal, confirm the communication method, and establish what happens when anyone calls STOP. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] Use an agreed communication method for the lift, confirm every crew member understands the signals, and keep a suitable backup ready.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1] | Currently free to use, with no paid plan built yet. [1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Direct voice communication and agreed hand signals | not published | not published | not published |
What you need before you start
Before coordinating truss and lighting hoists, the stage rigging crew and motor operator need an agreed plan for the planned movement. Identify the truss or lighting section being moved, the intended direction, the people watching the load and surrounding area, and the person authorized to communicate movement instructions. Agree on the meaning of STOP, HOLD and SLOW, and decide how the crew will respond if a signal is unclear or communication is interrupted.
Choose a communication method that the operator and relevant crew members can use throughout the lift. If using OperatorLink, the jobsite crew can see STOP, HOLD and SLOW, while button presses, chat and voice pass between phones in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Each participating phone needs a working data connection for browser communication.
Before moving any hoist, confirm that the crew has joined the chosen communication method and can understand the agreed signals. Decide who will call STOP, how the operator will acknowledge instructions, and what the crew will do if a phone loses its connection. Keep the lift within the approved rigging plan and the site's established procedures. Do not begin until the operator and crew are ready and any unclear instruction has been resolved.
Step by step
- Review the planned movement. Identify the truss or lighting load, its intended path and the hoists involved. Confirm the movement sequence with the responsible rigging personnel before the operator starts. Resolve conflicts between planned movements before giving a movement instruction.
- Assign communication responsibilities. Make clear who sends movement instructions, who watches the load and surrounding area, and who can call STOP. Ensure the motor operator knows which instructions to follow and how to respond when directions conflict or are unclear.
- Agree on signal meanings. Confirm what STOP, HOLD and SLOW mean for the crew. Decide how a movement instruction will be acknowledged and what action follows an interrupted or uncertain exchange. Never treat silence as confirmation that a movement is safe to continue.
- Choose the communication method. Use the method agreed for the site, such as a suitable radio, a phone communication method or OperatorLink. OperatorLink passes button presses, chat and voice between phones in a browser. [1] If using it, the person starting the jobsite shares a link or QR code, and the crew joins from it. [1]
- Confirm the crew is ready. Check that the operator and the people responsible for observing the load can communicate clearly. For a phone-based method, confirm that the necessary phones have a working data connection and that each person can see or hear the agreed signals. Resolve any communication problem before moving.
- Give movement instructions deliberately. Send one clear instruction at a time according to the agreed plan. OperatorLink keeps sending a move while its move button is held, and the receiving phones drop that move if it stops arriving for 2 seconds. [1] This behavior is not proof that the load or every hoist is moving as intended, so the crew must continue observing the actual movement.
- Use HOLD or SLOW when required. Communicate the instruction clearly and confirm the operator's response. In OperatorLink, HOLD and SLOW remain on for everyone in the jobsite until the last person leaves. [1] The crew should understand this behavior before the lift and agree on how to proceed after a pause.
- Stop when there is uncertainty. If someone sees a hazard, cannot understand a signal or loses communication, follow the agreed stop procedure. In OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Confirm the situation is understood and the responsible personnel have authorized resumption before movement begins again.
- Close out the movement. Confirm the load is in its intended position and follow the site's procedure for securing the equipment. Tell the crew when the movement is complete. If OperatorLink was used, remember that its jobsite link stops working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [1] [1] Start a fresh jobsite when needed rather than relying on an expired or cleared session.
Tools that can do it
OperatorLink
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] No app install is needed to use the browser version. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] Anyone who joins can take part in a voice call, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] Its browser-based communication depends on a working phone data connection, so agree on a fallback before the lift.
Two-way radio
A two-way radio is another option to consider for communication between the motor operator and the rigging crew. The available facts do not establish the capabilities, coverage or cost of a particular radio. Check whether the chosen equipment works across the site, whether the crew can hear instructions over event noise, and how the operator will acknowledge each movement instruction. Agree on a clear response if a transmission is unclear or communication stops.
Phone video call app
A phone video call app is another option to assess when crew members need to communicate using phones. The available facts do not establish what a particular app supports or what it costs. Before choosing one, check whether the operator and relevant crew members can hear each other, whether the necessary view of the load can be maintained, and how interruptions will be handled. Do not assume that a video view replaces direct observation or the site's established signaling procedure.
Direct voice communication and agreed hand signals
The crew can also consider the voice and hand communication methods already established for the site. Confirm that the operator and signal personnel agree on the meanings and sequence of instructions. Check visibility, background noise and the conditions in which the method will be used. The appropriate choice depends on the lift plan, the site and the communication arrangements approved for the job.
Before selecting an option, compare how the crew will issue movement instructions, acknowledge them, call STOP and respond to communication loss. Check the actual equipment and service details rather than assuming that any option will work under every site condition.
Common mistakes to avoid
Starting before everyone is ready. An operator and crew member may have different expectations about which hoist should move or when a movement should stop. Review the planned sequence and confirm that the people responsible for the lift understand their roles before movement begins.
Using unclear instructions. Agree on the meaning of each signal and the expected acknowledgment. If a direction is unclear or conflicts with another instruction, stop and resolve the uncertainty rather than guessing.
Assuming a phone signal will always arrive. OperatorLink passes button presses, chat and voice between phones in a browser. [1] If a move stops arriving for 2 seconds, the receiving phones drop it. [1] Do not treat a displayed signal as proof that the load has responded, and establish a backup communication method before starting.
Forgetting how HOLD and SLOW behave. OperatorLink keeps these signals active for everyone in the jobsite until the last person leaves. [1] Explain this behavior in advance and ensure the crew knows how the next movement will be authorized.
Assuming all phones alert in the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check each device's visible alerts and agree on a response that does not depend on vibration alone.
Reusing an old jobsite session. An OperatorLink jobsite link stops working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [1] [1] Check the session before the next shift and create a fresh one when needed. Do not begin until the crew has rejoined and confirmed communication.
Frequently asked questions
How can a rigging crew coordinate truss and lighting hoists with the motor operator?
Start with the approved movement plan and agree on who gives instructions, who watches the load and who can call STOP. Confirm the meaning of each signal and the expected acknowledgment before moving. Choose a communication method that the operator and relevant crew members can use throughout the lift. If communication becomes unclear or is interrupted, follow the agreed stop procedure and resolve the problem before resuming.
Can OperatorLink show hoist movement signals on a phone?
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Each phone needs a working data connection for browser communication, and the crew should confirm that the signals arrive before starting the lift.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else in the jobsite. [1] The crew should already have agreed on what happens after a stop, including how the operator acknowledges the instruction and who can authorize movement to resume. Confirm that the cause of the stop has been resolved before restarting the planned movement.
Do HOLD and SLOW stay active in OperatorLink?
Yes. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Explain this behavior to the crew before the lift, especially when the operator needs to pause and later resume movement. The crew should agree on how a new movement instruction will be given and confirmed after the pause.
Is OperatorLink free for stage rigging crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser without requiring an app install. [1] The phones still need a working data connection to pass button presses, chat and voice. [1] Check the site's communication requirements and arrange a suitable fallback before relying on a phone-based method for a lift.
Can OperatorLink replace a radio during a hoist movement?
Choose communication methods according to the lift plan and the site's established procedures. OperatorLink passes button presses, chat and voice between phones in a browser. [1] Its communication depends on the phone connection, so the crew should plan for an interruption and agree on an alternative method before starting. Check the requirements for the particular lift rather than assuming a phone-based method is suitable for every site.
How long does an OperatorLink jobsite remain available?
An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Before a new shift, check whether the previous session is still available. If it has expired or been cleared, start a new jobsite and share its link or QR code with the crew before coordinating the lift.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift