2Dig Plain comparisons of crane signalling and jobsite communication tools

Coordinate trades during crane days for construction project managers

Coordinate trades like the crane crew, signal person and steel crews on crane days. What to have ready, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Coordinating trades on a crane day means getting the rigging crew, the signal person and the crews at the pickup and landing points on the same STOP, HOLD and SLOW. One way to share those signals is a jobsite session in a phone browser that someone opens and shares as a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. A jobsite with nobody in it is wiped after 3 idle hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, and no paid plan has been built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

To coordinate trades on a crane day, the project manager needs the lift plan, the sequence for the work at the pickup and landing points, and a way to reach every crew in the path of the load. Before the day starts, confirm which trades are on site, where each landing zone is, and who is the signal person, because the crews around the load change with each pickup. If the crew shares STOP, HOLD and SLOW in a phone browser, check that each phone can connect and pass signals, chat and voice between phones in the browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh. [1] Decide which signals stay on for everyone until the last person leaves the jobsite, because those apply to the whole crew sharing the session. [1] Before the lift, add the page to each phone's home screen so it opens as a standalone app. [1]

Step by step

  1. Confirm which trades are on site and where each one works, so every crew knows who is in the path of the load for each pickup.
  2. Agree on a single signal person for the day, and make sure every crew knows who that is for the communication.
  3. Sequence the work so the pickup crew and the landing crew are not both under the load line at the same time.
  4. Set one shared way to send STOP, HOLD and SLOW to everyone, because the trades around the load change with each move.
  5. If the shared way is a browser session, check each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1]
  6. Have one person open the session from a phone browser, with no app install needed, and share the link or QR code with every trade lead. [1] [1]
  7. Confirm every trade lead is in the session before the first lift so they all see the same signals. [1]
  8. Agree which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
  9. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the load moves. [1]
  10. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so every crew pauses and checks before moving again. [1]
  11. At the end of the day, have every crew leave the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours, so start a fresh session on the next crane day. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear go out as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [1] [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the day.

Match the option to the crew and the site, keep a fallback ready, and check that the phones can connect before the lift.

Common mistakes to avoid

Relying on one trade lead for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals until the next crane day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting a phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [1]

Frequently asked questions

Is OperatorLink free to use on a crane day?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals are shown through a phone browser. Check that the phones can connect before relying on the shared session, and go over the STOP, HOLD and SLOW plan with the whole crew before the first lift.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. A jobsite with nobody in it is wiped after 3 idle hours. For the next crane day, start a new session and share the new link or QR code with every trade lead.

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so make sure the crew knows how the alert appears on each phone before the lift.

Can trades talk over the phone during a crane day?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons