Coordinate Tandem Travel Moves for Gantry Cranes
Learn how gantry crane operators can coordinate tandem travel moves with the hook person below, prepare signals, choose communication tools and avoid mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To coordinate tandem travel moves with the hook person below, agree on the travel path, who gives each signal, when to hold, when to stop and how to confirm that movement can continue. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1] | Currently free to use, with no paid plan built yet. [1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Agreed hand signals and direct voice communication | not published | not published | not published |
What you need before you start
Before a tandem travel move begins, the gantry crane operator and the hook person below need a shared plan for the route, the load and the signals that control movement. Agree on who calls for travel, who confirms that the path is clear, and what everyone does when a HOLD or STOP signal appears. If more than one person is involved in guiding the load, make sure the crew knows whose instructions control the next movement.
Check the travel path for people, obstacles and changes in clearance. Confirm that the load is secured as planned and that the hook person has a safe position from which to observe the load and its route.
Choose a communication method that the operator and hook person can use throughout the move. If using phones, each person needs a working browser and phone data connection because OperatorLink passes button presses, chat and voice between phones in a browser. [1] The person starting the jobsite shares a link or QR code, and the crew joins from it. [1]
Agree on a backup communication method before travel starts. Check that everyone can recognize the agreed signals and knows how to pause the move if communication becomes unclear.
Step by step
- Review the travel plan. Identify the direction of travel, the intended route, the load's path and any areas where clearance may be limited. Agree on the conditions that require a pause or a change to the plan before the crane begins moving.
- Agree on who gives instructions. The operator and hook person need to know who initiates movement, who confirms that the route is clear and how conflicting or unclear instructions will be handled. If several crew members are present, agree on how their observations reach the person controlling the move.
- Choose and check the communication method. Confirm that the operator and hook person can hear or see the agreed signals. If using OperatorLink, the person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] It runs in a phone browser with no app install. [1] Check that every phone has a working data connection and agree on a backup before starting.
- Confirm readiness before travel. The hook person checks the route from their position and communicates whether the planned movement can begin. The operator waits for the agreed confirmation rather than treating silence as permission to move. If the load, route or crew position changes, pause and agree on the next action.
- Start the move using the agreed signal. Give only the movement instruction that the crew has agreed to use. The operator follows the lift plan and watches for the hook person's updates. Keep communication short and clear so that the direction and intent of each instruction are understood.
- Keep checking the route during travel. The hook person watches the load and surrounding clearance from a safe position and reports changes promptly. If the operator loses contact, receives an unclear instruction or sees a conflict between signals, follow the agreed stop procedure.
- Use HOLD and SLOW deliberately. If OperatorLink is being used, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] The crew should agree in advance what each signal means for the planned move and confirm when it is appropriate to continue.
- Stop when required. In OperatorLink, pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Treat the stop as a reason to pause, check the situation and establish clear permission before resuming.
- Confirm the end of travel. Once the planned movement is complete, communicate that the crane and load have reached the agreed position. Confirm the next action with the crew before beginning another movement or changing the plan.
- Close out the communication session. If using OperatorLink, have everyone leave the jobsite when finished. A jobsite with nobody in it is wiped after 3 idle hours. [1] Start a fresh session for a later shift when needed, and share the new link or QR code with the crew.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The crew can join using a link or QR code shared by the person who starts the jobsite. [1] No app install is needed to use it in a phone browser. [1] Anyone who joins can take part in a voice call from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] Check that the phone connection works at the worksite and agree on a fallback communication method before relying on phone signals.
A two-way radio is another option to consider for coordinating the operator and hook person. The available facts here do not describe a particular radio model or its features. Check whether the crew can communicate clearly over the radio, whether everyone knows the channel and call procedure, and what the team will do if a message is not understood.
A phone video call app may be another option to consider. The available facts here do not establish the features or fees of any particular app. Check whether the operator and hook person can keep communication available during travel, whether the view helps them communicate as intended, and what happens if a phone locks or the connection drops.
Agreed hand signals and direct voice communication can also form part of the crew's communication plan. The available facts here do not establish a specific hand-signal procedure. Agree on the signals before the move, make sure the crew understands them and decide how the operator will be notified if the hook person cannot safely give a signal.
| Option | What it does | Fee | Card fee | |---|---|---|---| | OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1] | Currently free to use, with no paid plan built yet. [1] | not published | | Two-way radio | not published | not published | not published | | Phone video call app | not published | not published | not published | | Agreed hand signals and direct voice communication | not published | not published | not published |
Match the communication method to the site conditions, the crew's agreed procedure and the visibility available during travel. Button presses, chat and voice pass between phones in a browser. [1] Check that the phones have a working data connection and agree on a backup method.
Common mistakes to avoid
Starting before the crew agrees on who gives instructions. The operator and hook person should know who initiates movement, who confirms the path and what happens when instructions conflict. Resolve uncertainty before travel begins.
Continuing after losing communication. Phone-browser communication depends on the phone's data connection. [1] Agree on what to do if a signal stops arriving, and keep a suitable backup available.
Assuming all phones alert in the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the visible alert and available notifications on each phone before the lift.
Forgetting how HOLD and SLOW behave. In OperatorLink, these signals stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands when a signal is active and agrees before continuing.
Assuming a move signal remains active indefinitely. Holding a move button keeps sending that move to the other phones, but if it stops arriving for 2 seconds, the other phones drop it. [1] Watch for interruptions and follow the agreed response rather than assuming that a movement instruction is still being received.
Reusing an old jobsite session without checking it. A jobsite link stops working 12 hours after the first person joins, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1] Check the session before a shift and start a new one when needed.
Things to check before you choose
Before choosing a communication tool for tandem travel moves, check whether it supports the signals the crew needs, whether the operator and hook person can use it from their positions, and whether it remains practical for the expected site conditions.
For OperatorLink, check phone data coverage at the worksite, the differences in phone alert behavior and the time limits on jobsite sessions. Links stop working 12 hours after the first person joins, and empty jobsites are wiped after 3 idle hours. [1] [1]
Also agree on how the crew will confirm that everyone is ready, how HOLD and SLOW will be cleared and who can authorize movement to resume.
Frequently asked questions
How can gantry crane operators coordinate tandem travel moves?
Agree on the travel path, the person who gives movement instructions, the signals that mean pause or stop and the method for confirming readiness. The operator should follow the agreed procedure and pause if communication becomes unclear. Choose a communication method the crew can use throughout the move and agree on a backup before starting.
Can OperatorLink help coordinate gantry crane travel?
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Holding a move button keeps sending that move to the other phones, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] The crew should still agree on its movement procedure and a backup communication method before travel begins.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] The crew should treat the signal as a reason to pause, check the load and route, and establish clear permission before resuming.
Can the hook person use OperatorLink to talk to the crane operator?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] The phones need a working data connection, so agree on a backup in case the call or other phone communication becomes unavailable.
Does OperatorLink work without a phone data connection?
OperatorLink requires a working phone data connection, because its signals, chat and voice pass between phones in a browser. [1] Before using it for a travel move, check that the phones have a working data connection at the jobsite. Agree on what the crew will do if communication is interrupted, and keep a suitable backup method available rather than relying on a phone signal that may not be present.
How long does an OperatorLink jobsite session last?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Check that the shared link still works before the shift.
Do OperatorLink STOP alerts make every phone buzz?
On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] The crew should check how each phone displays the alert before the move. Agree on a backup signal and the procedure for pausing movement if a crew member does not receive or recognize an instruction.
Is OperatorLink free to use for gantry crane crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Being free does not remove the phone requirements: the signals travel over the phone network, so check that the phones have a working data connection at the jobsite before starting a move. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift