# Coordinate stacking sequences between install crew and cab
How modular building installers coordinate stacking sequences between the install crew and the cab.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To coordinate stacking sequences between the install crew and the cab, the crew settles the lift order before the first module is set, then shares one jobsite session as a link or QR code in a phone browser. [1] [1] STOP releases every held direction and shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] The phones need a working data signal, iPhone Safari does not buzz on alert, and a session with nobody in it is wiped after 3 idle hours. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Two-way radio | not published | not published | not published |
| Paper call sheet | not published | not published | not published |
What you need before you start
To coordinate the stacking sequence, the cab and the install crew need phones with a working browser and a data signal. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] Settle the order before the first module is lifted, so every crew member knows which piece comes next. Decide whose phone shows HOLD and SLOW, because those two signals stay on for everyone until the last person leaves. [1] If everyone leaves and the session sits empty, it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh. [1] Before the lift, add the page to the phone's home screen so it opens as a standalone app. [1]
Step by step
- Agree on the stacking order before the first module is lifted, and write it so the cab and the install crew follow the same list.
- Check each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1]
- Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
- That person shares the link or QR code with the crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the lift begins, so each one sees the same signals. [1]
- Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
- Pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while checking the load. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1]
A two-way radio is a second option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.
A paper call sheet is a third option. No facts here describe one, so check that the cab and the install crew read the same order from it and that each step is called out before the module moves.
Match the option to the crew and the site, and keep a fallback ready, since signals in a browser depend on the phone's data signal.
Common mistakes to avoid
Starting the lift before the cab and the install crew agree on which module comes next, so the two ends work to different sequences. Settle the order and confirm it before the first module moves. Relying on one phone for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals are shown through a phone browser, so each phone still needs a working data signal for the shift. Check the phone's data plan before relying on it to coordinate the stacking sequence.
What happens when the STOP button is pressed during a stacking sequence?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the install crew and the cab see it at once. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1] The crew clears them on purpose before the next module is set.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]
Can crew members talk over the phone during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback for the stacking sequence.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift