2Dig Plain comparisons of crane signalling and jobsite communication tools

Coordinating sequential picks across spaced rows for solar crews

How solar farm erection crews coordinate sequential picks across widely spaced rows. What to have ready, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Coordinating sequential picks across widely spaced rows means the crew moves row by row, so every pick needs a signal plan that reaches the row it belongs to. A jobsite session in a phone browser can carry STOP, HOLD and SLOW between phones, with someone sharing a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] The phone needs a working data signal, iPhone Safari does not buzz on alert, and an idle session is wiped after 3 hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone voice or video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published
Runner relaying between rowsnot publishednot publishednot published

What you need before you start

To coordinate sequential picks across widely spaced rows, each crew member needs a phone. Button presses, chat and voice pass between phones in a browser. [1] Decide the pick order at the start of the shift: which row goes first, which goes last, and which way the crew moves between rows. Put a signal person on the row where each pick happens, so the crane operator always has eyes on the load being lifted. The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so start a fresh session each shift. [1] If everyone leaves and the session sits empty, it is wiped after 3 idle hours, so a stopped shift may need to be started again. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Before the first pick, add the page to the phone's home screen so it opens as a standalone app. [1]

Step by step

  1. Walk the rows before the first pick and agree the pick order for the day: which row goes first, which goes last, and which direction the crew moves between rows.
  2. Put a signal person on the row where each pick happens, so the crane operator always looks at someone standing at the load being picked.
  3. Agree on what STOP, HOLD and SLOW mean for the whole crew, and agree that STOP applies to every row at once, not only the row that called it.
  4. Choose how signals travel between rows, and test it across the widest gap on the site before the first lift.
  5. If the crew passes signals between phones, the person who starts the jobsite opens the session and shares the link or QR code, and each crew member joins from it. [1]
  6. Confirm every crew member is in the session before the first pick, so each one sees the same signals. [1]
  7. Agree which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves, so a held state carried between rows is a deliberate one. [1]
  8. During a pick, keep the move button held: pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
  9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so every row pauses and looks before moving again. [1]
  10. Move to the next row only after the crane operator calls the pick clear, and repeat the signal check at the new row before the next lift starts.
  11. Between picks, use one-tap radio-style calls such as Go Ahead, Copy That and All Clear, sent as chat messages, so the next row knows the last one is done. [1]
  12. At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Between picks, one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [1] [1] A jobsite link stops working 12 hours after the first person joins it, so a fresh link is started for each shift. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A phone voice or video call is a second option. No facts here describe one, so check whether the call reaches every row across the site, whether it stays open for the whole shift, and whether the crane operator can talk and watch the load at the same time.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every row can be heard over machine noise, and that the channel stays clear through each pick.

A runner relaying between rows is a fourth option. No facts here describe one, so check how long a message takes to cross the site on foot, and who holds the pick when the runner is between rows.

Does the chosen option work across the site, and is a fallback ready if it cannot be used?

Common mistakes to avoid

Starting the first pick before the pick order is agreed: with rows spread across the site, a crew that guesses the order can have two rows ready to lift at once. Assuming one signal method reaches every row: test the widest gap on the site first, because a method that works at one row may not reach the far end. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Letting a held state carry over between rows by accident: HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Reusing yesterday's link: a jobsite link stops working 12 hours after the first person joins it. [1] Losing the signal screen mid-pick, so confirm the phone screen stays on for the whole shift before the first pick.

Frequently asked questions

Can OperatorLink reach every row of a solar farm site?

OperatorLink passes button presses, chat and voice between phones in a phone browser. [1] Rows that sit far apart depend on the data signal reaching each phone, so check the widest gap on the site before the first pick. The sources for this page do not establish signal coverage at any particular site, so walk the rows and confirm it yourself.

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals travel over the phone network, so each phone still needs a working data signal for the whole shift. Check the phone's data plan before relying on it for a full day of picks across the rows.

What happens when the STOP button is pressed during a pick?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so every row sees it at once. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] After a STOP, each row confirms it is clear before the next pick starts.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Can crew members talk between rows during a pick?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback between widely spaced rows.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons