How to coordinate segment lifts over water for bridge crews
Coordinate bridge segment lifts over water: what crews need ready, steps for signals and radio backup, tool options, and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Agree the lift plan and the meaning of each signal before the crane moves, check that every phone has a data signal over the water, and keep a backup method ready. OperatorLink shows STOP, HOLD and SLOW to the crew in a phone browser [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before a segment leaves the barge or the bank, the crew needs a written lift plan that everyone has read. The plan should name the crane operator, the signal person, the riggers and the barge crew, and say where each segment lands. Agree in advance what STOP, HOLD and SLOW mean on this job, so each person reads them the same way.
Button presses, chat and voice pass between phones in a browser. [1] Over water the phone network can be weaker, so check the signal on the span, on the barge and at the landing point before the lift.
The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so start the session close to the lift. [1] A session with nobody in it is wiped after 3 idle hours. [1]
Keep a backup method ready, such as hand signals agreed in advance, in case a phone signal drops during the lift.
Step by step
- Walk the lift plan with every crew member, including the barge crew, and confirm who gives each signal.
- Check each phone's browser and data signal at the lift point, on the span and on the barge.
- Agree what STOP, HOLD and SLOW mean on this job, and who may give each one.
- It runs in a phone browser with no app install. [1]
- That person shares the link or QR code, and each crew member joins from it. [1]
- Confirm every member has joined before the first move. [1]
- Agree when HOLD and SLOW will be used. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves, so the crew should settle in advance how a hold ends. [1]
- Confirm each move with the crane operator before it starts. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]
- Use the quick calls Go Ahead, Copy That and All Clear for short confirmations. One-tap radio-style calls such as these are sent as chat messages. [1] Anyone who joins can also take part in a voice call run from the phone browser. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Pause and confirm the load before moving again.
- At the end of the lift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The app can be added to a phone's home screen as a standalone app. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole lift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise on the water, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready for the lift.
Common mistakes to avoid
Relying on one phone for every signal, so keep a voice or hand backup ready.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the sound and screen on every device before the lift.
Leaving a session with nobody in it and expecting it to be ready the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [1] Agree in advance who decides when a hold ends.
Not confirming that moves still arrive. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]
Letting a phone's screen lock mid-lift. The app can be added to the home screen as a standalone app, so check each phone's screen settings before the lift begins. [1]
Frequently asked questions
Is OperatorLink free to use for bridge crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew does not need to download anything before the lift. [1] Button presses, chat and voice pass between phones in a browser. [1] Check each phone's data plan and the signal at the lift point before relying on it.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, because they stay on for everyone in the jobsite until the last person leaves. [1] On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz. [1] On iPhones, check that the full-screen alert is seen, and agree before the lift what the crew does when STOP appears.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so an older link may no longer open. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a lift on a later day, start a new session and share its link or QR code with the crew. Check the timing against the lift schedule so the session is open when the crew arrives.
Can OperatorLink be used for voice calls during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a backup method ready for voice. Test the call at the actual landing point before the lift, since noise on the water and the span may affect how clearly voices carry.
How do bridge crew members join an OperatorLink session?
The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Nothing needs to be installed first, because the page runs in the browser with no app install. [1] Once the crew has joined, button presses, chat and voice pass between phones in the browser. [1] Confirm every member has joined before the first move. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift