2Dig Plain comparisons of crane signalling and jobsite communication tools

How to coordinate rail-mounted crane lifts in track possessions

Coordinate rail-mounted crane lifts during track possessions by agreeing on the lift plan and ground signals, then share signals across the crew.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

To coordinate rail-mounted crane lifts during a track possession, the operator and the ground crew join one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves the jobsite. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, and an idle session is wiped after 3 hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a session from a cleared possession slot may need to be started fresh. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves the jobsite. [1] Add the page to the phone's home screen so it opens as a standalone app. [1] The crew also needs the possession details agreed on the ground: the rail-mounted crane's position on the track, the load plan, and who gives the ground signals. Confirm the possession window so the lifts fit the time slot, and make sure every phone the crew uses has its screen set to stay awake for the shift.

Step by step

  1. Agree the possession details before any lift: the rail-mounted crane's position on the track, the weight and path of each load, and which crew members give and take the ground signals, so the lift plan and the signal set match the worksite.
  2. Check that each phone has a working browser, because button presses, chat and voice pass between phones in a browser. [1]
  3. Have the person who starts the jobsite open the session from a phone browser, with no app install needed, so any crew phone can be used. [1]
  4. That person shares the link or QR code with the ground crew, and each member joins from it before the crane moves. [1]
  5. Confirm who has joined the session before the lift begins. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]
  6. Remember that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  7. Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
  8. Run the lifts inside the possession window and leave time to set the load down before track access closes, so no lift is left hanging when the slot ends.
  9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  10. Remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] The page runs in a phone browser, so nobody needs to install an app. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [1] [1]

A phone video call app is a second option. Check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. Check whether the crew agrees on plain voice, whether every member can be heard over machine and track noise, and whether the channel stays clear through the lift.

Match the option to the crew and the worksite. Before choosing a tool, check how the crew will communicate during the possession and what alternative they will use if their chosen method is unavailable.

Common mistakes to avoid

Relying on one phone for the STOP signal without a fallback: keep a voice or hand option ready during the possession. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the alert on every device. [1] Leaving an empty session and expecting it to hold signals for the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Timing lifts too close to the end of the possession, so a load can be left mid-air when the slot closes. Letting the phone go to sleep mid-lift; the page can be added to the home screen as a standalone app. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals pass between phones in a browser. [1] Is the phone's data plan suitable for the planned possession and the time the crew will need to stay connected?

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the alert on every phone in the crew before the lift.

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons