2Dig Plain comparisons of crane signalling and jobsite communication tools

Coordinating pole and equipment lifts with the operator

How a utility line crew keeps the operator in the loop on pole and equipment lifts: what to have ready, the steps, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

For pole and equipment lifts, the line crew and the operator sit in one shared jobsite session that runs in a phone browser, opened from a link or QR code. [1] [1] A STOP press flashes a full-screen alert on every other phone, and HOLD and SLOW keep showing until the last person leaves the session. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari does not, and a session with nobody in it is cleared after 3 idle hours. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Every phone that takes part in the lift needs a working browser, meaning a current phone browser that can open the jobsite link, and a data connection. Button presses, chat and voice pass between phones in a browser. [1] One person opens the jobsite session and hands out the link or QR code; the rest of the crew joins from it. [1] A session that sits empty for 3 idle hours is wiped, so a break between lifts may mean starting a new one. [1] Pick the phone that carries the operator's view, since HOLD and SLOW keep showing for everyone until the last person leaves the session. [1] Put the page on the phone's home screen before the first lift so it opens as a standalone app. [1] Agree on who presses STOP, and make sure every phone in the crew can read the alert screen at once. [1]

Step by step

  1. Before the shift, make sure each phone has a working browser and a data connection. [1]
  2. The person who starts the jobsite opens the session from a phone browser; no app install is needed. [1]
  3. That person hands the link or QR code to the line crew, and each member joins from it. [1]
  4. Before the first pole goes up, confirm every crew member is in the session so each one sees the same signals. [1]
  5. Set the rule for the latched signals: HOLD and SLOW keep showing for everyone in the jobsite and clear only when the last person leaves. [1]
  6. While a move button is held, that move keeps reaching the other phones; if it stops arriving for 2 seconds, they drop it, so keep the button held while the load is checked. [1]
  7. A STOP press releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  8. When the shift ends, everyone leaves the session; a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody installs an app; the page runs in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1]

A phone video call app is a second option. No facts here describe one, so check whether the call stays open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.

Common mistakes to avoid

Relying on one phone for the STOP signal: if one phone loses its data connection, the others may not see its STOP, so keep a voice or hand signal ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals reach the crew through a phone browser, so each phone needs a working data connection to use the page.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and flashes a full-screen alert to everyone else, so the crew sees it at once. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and hand out the new link or QR code. [1]

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Voice calls run from the phone browser, so a crew member without a working data connection cannot use them.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons