2Dig Plain comparisons of crane signalling and jobsite communication tools

How to Coordinate Pipe Picks from Yard to Trench

Plan pipe section picks from the staging yard to the trench with clear signals, agreed move calls, crew checks, tool options and a fallback plan.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Coordinate pipe section picks by agreeing on the pick order, the travel path, the landing point and who directs each move before lifting starts. Confirm that the crew can communicate from the staging yard to the trench, use clear calls for starting, holding, slowing and stopping, and agree on what happens if a signal is missed. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Keep the crew's established lifting procedures in place and have an agreed backup communication method ready.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1]Currently free to use, with no paid plan built yet. [1]not published
Two-way radionot publishednot publishednot published
Phone video call appnot publishednot publishednot published
Direct hand signalsnot publishednot publishednot published

What you need before you start

Before coordinating pipe section picks from the staging yard to the trench, have the pick sequence, the planned route and the intended landing locations ready. Identify the person directing the lift, the equipment operator and the crew members who will guide the pipe into position. Make sure everyone knows who gives the move instructions and who can call STOP.

Walk the route before the lift. Check the staging area, the travel path, the trench edge and the landing area for obstructions or changes that could affect the planned movement. Agree on where the load should pause while the crew checks its position and when the next move can be called.

Choose a communication method that the crew can use throughout the pick. OperatorLink passes button presses, chat and voice between phones in a browser. [1] It shows STOP, HOLD and SLOW to the jobsite crew. [1] A phone browser needs a working data connection for communication between phones, so check coverage along the route and have a fallback ready.

Before lifting, agree on plain calls such as Go Ahead, Copy That and All Clear. OperatorLink sends these one-tap radio-style calls as chat messages. [1] Make sure everyone understands what each call means, how to stop movement and what to do if communication becomes unclear.

Step by step

  1. Set the pick order. Identify the pipe sections to move and the order in which they should travel from the staging yard to the trench. Confirm the intended landing position for each section before the crew begins.
  1. Walk the route. Check the staging area, travel path and landing point. Agree on where the load may need to pause and how the crew will communicate if the route or landing position needs to change.
  1. Assign communication roles. Identify who directs the lift, who operates the lifting equipment and who helps guide the pipe. Agree on who issues movement instructions and make sure everyone knows that STOP means movement must cease.
  1. Choose and check the communication method. Confirm that each crew member can use the agreed method from their working position. If using OperatorLink, the person starting the jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink runs in a phone browser without an app install. [1] Check that the phones have a working data connection before relying on communication between them.
  1. Confirm the crew is ready. Before the pick begins, verify that the people involved understand the planned route, landing point, movement calls and stop procedure. With OperatorLink, the crew can see STOP, HOLD and SLOW, while button presses, chat and voice pass between phones in a browser. [1] Do not start the movement until the crew is ready and the communication method is working.
  1. Start the movement using agreed calls. Give the movement instruction through the chosen communication method. If using OperatorLink, holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it. [1] The crew should follow its agreed procedure if a command is unclear or no longer arrives.
  1. Pause when the crew needs to check position. Use the agreed HOLD or SLOW instruction when the lift needs a pause or reduced movement. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Confirm that everyone understands the current instruction before continuing.
  1. Stop when required. If the load, route or communication creates uncertainty, use the agreed stop procedure. In OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] The crew should check the situation and confirm readiness before movement resumes.
  1. Confirm the landing. Direct the pipe to its agreed landing point and confirm that the crew is ready for the next stage before moving on to the next section. Keep the communication method available until the pick is complete.
  1. Close out the jobsite session. Confirm that the crew has finished using the communication session before everyone leaves. An OperatorLink jobsite with nobody in it is wiped after 3 idle hours. [1] A jobsite link stops working 12 hours after the first person joins it. [1] Start a fresh session when needed and share the new link or QR code.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Nobody needs to install an app because it runs in a phone browser. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The service is currently free to use, and no paid plan is built yet. [1] Check mobile data coverage along the full route and agree on a backup method before the pick.

A two-way radio is another option to consider for voice instructions between the staging yard and trench crew. The available facts do not establish its range, channel capacity, price or performance at a particular site. Check that the crew can communicate clearly over the planned route and agree on the words used for starting, holding, slowing and stopping.

A phone video call app is an option to assess when the crew needs a live view as well as spoken instructions. The available facts do not establish which apps are suitable for lifting operations or how well they work at a specific site. Check whether the required views remain available from the crew's working positions and whether the call can be maintained during the pick.

Direct hand signals are another communication method to include in the lift plan where the crew can see the signal person. Agree on the signals and the positions from which they can be seen. Check how the crew will communicate if the load, equipment or site layout blocks the view.

Compare the methods against the route, crew positions, phone coverage, noise and the planned lift. No matter which method is selected, establish a clear stop procedure and a backup before the load leaves the staging area.

Common mistakes to avoid

Starting a pick before agreeing on the route can leave the operator and ground crew working from different expectations. Walk the travel path and confirm the landing point before lifting.

Using unclear calls can lead to different interpretations of the same instruction. Agree on the words for starting, holding, slowing, stopping and confirming readiness before the first pick.

Assuming every crew member can see or hear the instructions can leave someone out of the communication loop. Check crew positions, visibility, noise and the chosen communication method from the actual work areas.

Relying on a phone browser without checking coverage can interrupt communication between phones. OperatorLink passes button presses, chat and voice between phones in a browser. [1] Check the data connection along the route and keep an agreed fallback available.

Treating HOLD or SLOW as a momentary signal can cause confusion when the instruction remains displayed. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands how these signals behave before lifting.

Assuming all phones provide the same alert is another avoidable mistake. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the alert on each device and make sure the crew knows to look at the screen.

Leaving a jobsite session empty and expecting it to remain available for a later shift can also cause delays. OperatorLink wipes a jobsite with nobody in it after 3 idle hours, and its link stops working 12 hours after the first person joins. [1] [1] Start a new session when needed and confirm that everyone has joined before the next pick.

Frequently asked questions

How can pipeline crews coordinate pipe picks from a staging yard to a trench?

Agree on the pick order, travel route, landing point and person directing the movement before lifting begins. Confirm that the crew can communicate from the staging yard to the trench, and use clear calls for starting, holding, slowing and stopping. Choose a communication method that works at the site, check it before the pick, and agree on what the crew will do if a message is missed or the route changes.

Can OperatorLink help coordinate pipe section picks?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Check phone data coverage along the route and agree on a fallback communication method before lifting.

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser without an app install. [1] The phones still need a working data connection for signals, chat and voice to pass between them. [1] Check the site's coverage and the crew's phone arrangements before relying on it for a pick.

What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else in the jobsite. [1] The crew should follow its agreed stop procedure, check the load and surrounding conditions, and confirm readiness before movement resumes. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check how the alert appears on each crew member's phone.

How do HOLD and SLOW work in OperatorLink?

HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Agree on what each signal means before the pick begins, including when movement can resume. Make sure the crew understands that these signals remain active rather than treating them as brief button presses.

Does OperatorLink need an app installation?

OperatorLink runs in a phone browser, so the crew does not need to install an app. [1] The person starting the jobsite shares a link or QR code for other crew members to join. [1] The page can also be added to a phone's home screen as a standalone app. [1] Check that each phone can open the session and has a working data connection.

How long does an OperatorLink jobsite session remain available?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a later shift, start a new jobsite and share its link or QR code with the crew. Confirm that all required crew members have joined before starting another pipe pick.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons