How to coordinate mold and panel lifts with a gantry operator
Steps for precast yard crews to coordinate mold and panel lifts with the gantry operator, with what to have ready and the mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Precast yard crews can coordinate mold and panel lifts with the gantry operator by agreeing on one set of signals before the first lift and confirming that every person can see them. OperatorLink is one option: it shows STOP, HOLD and SLOW to the crew in a phone browser, with no app install. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before the first mold or panel lift, the precast yard crew needs a clear plan that everyone has read. Write down which mold or panel is moving, where it will be set down, and who gives the gantry operator each instruction, so nobody has to guess on the day. Agree on one person to direct the lift and one person to watch the load, and make sure the gantry operator can hear or see both of them from where they will work. Check that everyone who calls a move knows the same words, and keep those words the same for every lift.
Button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Keep a voice or hand signal ready as a fallback in case a phone loses its signal.
Step by step
- Walk through the lift plan with the gantry operator and the yard crew before the first lift, and name the mold or panel involved.
- Confirm that each person has a phone ready to join the jobsite before the lift.
- Have the person running the session open it from a phone browser, with no app install needed. [1]
- Share the link or QR code, and have each crew member join from it. [1]
- Confirm everyone is in the session before the lift starts, so each person sees the same signals. [1]
- Agree on the stop rule. STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so stop and look before moving again. [1]
- Use HOLD and SLOW for the lift, and remember that they stay on until the last person leaves the jobsite. [1]
- Keep each move button held while the move is needed. A move that stops arriving for 2 seconds is dropped by the other phones, so keep watching the load. [1]
- Use one-tap calls for short replies such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [1]
- At the end of the shift, have everyone leave the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody installs an app, because the page runs in the browser. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] A jobsite link stops working 12 hours after the first person joins it, so start a new session for each shift. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the gantry operator can see the load and the crew at the same time, and whether the phone locks its screen during a lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice words, that each person can be heard over machine noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready in case a phone loses its data signal.
Common mistakes to avoid
Relying on one phone for STOP leaves the crew with no backup, so keep a voice or hand signal ready. Assuming every phone alerts the same way can lead to missed signals, so keep a voice or hand signal ready as well. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before the lift begins. [1] Leaving an empty session open for the next day is a mistake, because a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves means a signal set earlier in the shift may still be showing. [1] Trusting a move that has stopped is another risk, since a move that stops arriving for 2 seconds is dropped by the other phones. [1] Reusing an old link is a mistake too, because a jobsite link stops working 12 hours after the first person joins. [1]
Frequently asked questions
Is OperatorLink free to use for precast yard crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew opens the jobsite link on their phones. [1] Each phone still needs a working data signal for the whole shift, so check the phone plans before the lift day.
What does the STOP signal do in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently: they stay on for everyone in the jobsite and are cleared when the last person leaves. [1] For a lift, agree on the stop rule before the first move, so every person knows what a STOP means.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a fresh session and share the new link or QR code with the crew. [1]
Do STOP signals buzz on every phone in OperatorLink?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Check the sound and screen on each phone before the lift begins. Confirm that every crew member has checked their own phone, since a missed alert can leave one person working from old signals.
Can OperatorLink carry voice calls between the gantry operator and the yard crew?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal as a fallback for the shift.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift