Coordinate Magnet and Grapple Moves With the Floor Crew
Learn how scrap yard crane operators can coordinate magnet and grapple moves with the floor crew, agree on signals, and compare communication tools.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To coordinate magnet and grapple moves with the floor crew, agree on clear signals before the lift, confirm who gives and receives each signal, and use the same communication method throughout the move. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The crew needs a working phone data signal to use browser-based communication, and a backup communication method should be ready.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] | Currently free to use, with no paid plan built yet. [1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Agreed hand signals | not published | not published | not published |
What you need before you start
Before coordinating magnet and grapple moves, make sure the crane operator and floor crew agree on who signals each move, what each signal means, and when a move must stop. The crew needs to know when the magnet or grapple is ready to move, when the load is being picked up, and when the load is being placed. Keep communication clear enough that nobody has to guess what the next instruction means.
Choose a communication method that everyone on the job can use. This might be agreed hand signals, a two-way radio, a phone video call, or a shared phone-browser session. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]
If using OperatorLink, have a phone with a working browser ready for each person who needs to join. [1] The person starting the jobsite shares a link or QR code, and the crew joins from it. [1] [1] No app install is needed to open it in a phone browser. [1]
Before moving the magnet or grapple, confirm that each person understands the agreed signals and knows how to call a stop. Decide how the crew will communicate if a phone loses its data signal, a message is unclear, or someone cannot see or hear the instruction. Keep the chosen backup available throughout the job.
Step by step
- Agree on who directs each move. Before starting, identify the crane operator and the floor crew members responsible for signaling. Make sure everyone knows who gives instructions and how to ask for clarification.
- Choose the communication method. Agree whether the crew will use hand signals, radios, a phone call, or a shared phone-browser session. If using OperatorLink, the crew can see STOP, HOLD and SLOW and pass button presses, chat and voice between phones. [1]
- Check the communication method before moving. Confirm that the people involved can receive and understand the signals. For a browser-based session, check that each phone has a working data signal. OperatorLink runs in a phone browser without requiring an app install. [1] [1]
- Confirm the next move before giving the instruction. Make sure the crane operator and floor crew agree on whether the magnet or grapple is being moved, whether the load is being picked up or placed, and whether the area is ready for the next action. Do not proceed when the instruction is unclear.
- Use the agreed signals consistently. Use the same communication method throughout the move. With OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands that these signals remain displayed rather than assuming they clear as soon as the button is released.
- Keep movement instructions active only while they are arriving. In OperatorLink, holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it. [1] Confirm that the instruction is still being received before continuing with the move.
- Stop when communication is unclear. If a signal is missed, the wrong move is indicated, or the crew cannot confirm the next instruction, stop the movement using the agreed method. In OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Confirm that the crew is ready before restarting.
- Confirm completion and reset communication. Once the magnet or grapple move is complete, make sure the crew agrees on the next action before proceeding. At the end of the job, have everyone leave the OperatorLink session if it is no longer needed. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] The crew can join through a link or QR code shared by the person who starts the jobsite, without installing an app. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] A jobsite link stops working 12 hours after the first person joins it. [1]
A two-way radio is another option to consider for coordinating the floor crew and crane operator. No specific radio features or fees are published here, so check how the crew will give movement instructions, confirm that they have been heard, and handle an unclear call before work begins.
A phone video call app is another option to consider when the crew wants to communicate through phones. Specific features and fees are not published here. Check whether the app can show the people who need to give signals, whether voice communication is clear enough for the job, and how the crew will communicate if the call drops.
Agreed hand signals can also be part of the communication plan. No product-specific details or fees are published for hand signals here. Agree on the meaning of each signal before work begins and make sure the operator and floor crew can see the person giving it.
The table compares the available information rather than assuming that every option provides the same functions. Choose a method the whole crew understands and prepare a backup in case the main method becomes unavailable.
Common mistakes to avoid
Using different meanings for the same signal can leave the operator and floor crew expecting different actions. Agree on each signal before moving the magnet or grapple, and ask for clarification whenever an instruction is uncertain.
Assuming that every person has received a message can create confusion. With OperatorLink, button presses, chat and voice pass between phones in a browser, so the phones need a working data signal. [1] Keep a backup communication method ready if the connection is interrupted.
Treating HOLD and SLOW as temporary messages is another mistake. In OperatorLink, these signals stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands how the signals behave before relying on them.
Assuming that phone alerts work the same way on every device can also cause confusion. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check that each person knows where to look for the signal on their own phone.
Leaving a jobsite session open and expecting it to remain available for a later shift can cause problems. OperatorLink links stop working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [1] [1] Start a fresh session when needed and share its new link or QR code with the crew. [1]
Things to check before you choose
Before settling on a communication method, check that every person involved can receive the agreed signals and knows what to do when an instruction is missed. Decide how the crew will confirm that a movement instruction has been understood and how work will pause if communication becomes unclear.
For OperatorLink, check that the phones have a working data signal, that everyone can join the jobsite, and that the crew understands how STOP, HOLD and SLOW behave. [1] [1] [1] [1] If phone alerts matter, check the device type because Android browsers buzz for signals such as STOP, while iPhone Safari ignores the buzz. [1]
Also check how long a session remains usable, how the crew will communicate if the connection fails, and whether a backup method is ready before lifting starts. OperatorLink links stop working 12 hours after the first person joins, and empty jobsites are wiped after 3 idle hours. [1] [1] For radios, phone video calls and hand signals, confirm the features and practical limits directly rather than assuming they match another option.
Frequently asked questions
How can crane operators coordinate magnet and grapple moves with the floor crew?
Agree on who gives movement instructions, what each signal means, and how the crew confirms that an instruction has been received. Choose a communication method that everyone can use, such as agreed hand signals, a radio, a phone call, or a shared phone-browser session. Stop and clarify whenever a signal is missed or misunderstood, and keep a backup method ready before starting work.
Can OperatorLink help coordinate magnet and grapple moves?
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] The crew should agree on signal meanings and have a backup communication method ready before moving a load.
Is OperatorLink free for scrap yard crane operators?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser without requiring an app install. [1] The phones still need a working data signal for button presses, chat and voice to pass between them. [1] Check the available phone data service before relying on a browser-based session during a shift.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone in the jobsite and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently because they stay on for everyone until the last person leaves the jobsite. [1] The crew should understand these differences before using the signals and should confirm that the next movement is understood before restarting.
Do OperatorLink STOP alerts buzz on iPhones?
On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check how each phone displays the alert before the crew relies on it. Agree on a backup way to communicate a stop if someone cannot see the alert or loses the phone's data signal.
How long does an OperatorLink jobsite session stay available?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a later shift, start a fresh jobsite session and share its new link or QR code with the crew. [1]
Can the floor crew talk through OperatorLink during a crane move?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice and messages pass between phones through a browser, so the phones need a working data signal. [1] Keep another communication method available if the connection becomes unavailable.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift