How to coordinate lifts with several ground crews
How heavy civil contractors coordinate lifts with several ground crews: what to have ready, the steps, tool choices and common mistakes to avoid.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Coordinate lifts with several ground crews by putting every crew on one jobsite session, agreeing on one signal set, checking that each phone can receive and show signals, and keeping a voice or hand fallback ready.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Shared checklist on paper | not published | not published | not published |
What you need before you start
Before crews take their positions, agree who directs each lift, which crew handles each part of the work, and how a change reaches everyone involved. Have the lift plan ready for the briefing, and ask each crew to identify its work area, its contact person and any point where responsibility passes to another crew.
Choose the communication method before people spread out, then check it from the places where they expect to work. Agree how crews identify themselves, how they acknowledge an instruction and how they raise a question without adding another movement instruction.
Include relief workers and shift changes in that discussion. Write down who hands over unfinished work, who receives it and how the remaining crews learn that the contact person has changed. Keep the agreed fallback ready, and cover what everyone should do if an instruction is unclear or an expected reply does not arrive.
Step by step
- Walk through the planned lift with the crew contacts. Name the pickup area, the route and the landing area, then ask each contact to describe the work assigned to that crew.
- Agree who gives movement instructions during each part of the lift. Tell every crew how that responsibility will pass to another person, and distinguish a question from an instruction to move.
- Choose the words or signals the crews will use. Discuss how to identify the intended crew and the lift being discussed, especially where nearby crews are preparing separate work.
- Check communication from the actual work positions before starting. Ask each crew contact to acknowledge a practice message, and resolve any unclear wording or missed reply before relying on that method.
- Review the planned handoff between crews. Name the person handing over, the person taking over and the acknowledgment expected before the next part of the work begins.
- Keep questions about changes separate from movement instructions. If the landing area, crew assignment or planned route changes, pause the coordination discussion and brief every affected crew on the revised plan.
- Rehearse the agreed response to unclear communication. Include how a crew raises a concern, how everyone acknowledges the pause and who confirms that the concern has been addressed.
- Brief anyone joining partway through the work before assigning a role. Cover the current lift, the crew contacts, the communication method and any changes made since the opening discussion.
- Close with a handover of unfinished work. Record the current plan and unresolved questions, and identify who will brief the incoming crews before they continue.
Tools that can do it
OperatorLink is made by the team that publishes this site. With OperatorLink, crews can exchange button presses, chat and voice through their phone browsers and see STOP, HOLD and SLOW. [1] Crew members open OperatorLink in a phone browser without installing an app. [1] To bring crews into the jobsite, its starter sends them a link or QR code to join through. [1]
A phone video call app is another option to consider. Before choosing a particular app, check whether every intended crew contact can join, whether the required view remains visible from the planned positions and what happens when a call is interrupted.
Include a two-way radio among the options to check. Check audibility at the work positions, how crews identify the intended recipient and how they handle competing calls; no facts supplied here establish those details for a particular radio.
Consider a shared checklist on paper when planning the crew briefing and handover. Check who updates the sheet, how revised copies reach the crew contacts and what separate method carries movement instructions during the lift.
Things to check before you choose: can every crew receive the intended message from its work position, identify who sent it and follow the agreed fallback if communication is interrupted?
Common mistakes to avoid
Do not leave crew boundaries vague: name who handles each stage and rehearse the transfer of responsibility before work starts, including how the receiving crew acknowledges it. Avoid using a general call when the instruction concerns a particular crew; agree how to name the intended recipient and the lift under discussion.
Do not leave a changed plan with only the crew that requested it; gather acknowledgments from every affected crew before continuing under the revision. Avoid treating silence as an acknowledgment, and cover the response to a missing reply during the briefing.
Do not assume a replacement crew member has heard earlier decisions; brief that person on current assignments, planned handoffs and unresolved questions before handing over. Avoid choosing a communication method only at the briefing point; check it from the pickup and landing positions, and include the fallback in the same rehearsal.
Frequently asked questions
Is OperatorLink free to use?
There is currently no charge to use OperatorLink, and a paid plan has not been built. [1] For a job involving several crews, include communication checks in the preparation: identify who needs to receive instructions, where those people will stand and how they will acknowledge a message.
What does OperatorLink do when someone presses STOP?
Pressing STOP in OperatorLink releases all held directions across the phones and puts a full-screen alert on everyone else's phone. [1] Before starting work, discuss how each crew will acknowledge a stop and how the person directing the lift will confirm readiness to continue.
When does an OperatorLink jobsite link expire?
OperatorLink counts 12 hours from the first person joining, after which the jobsite link no longer works. [1] An empty jobsite is wiped once it has been idle for 3 hours. [1] Include access checks in the incoming crews' briefing rather than assuming an earlier shift's arrangements are still ready.
Does OperatorLink make every phone buzz for STOP?
OperatorLink signals such as STOP cause a buzz in Android browsers; Safari on an iPhone ignores that buzz. [1] During preparation, check how an alert appears on each crew member's phone, and agree how the crew will acknowledge it from the position where that person will work.
Can several ground crews use voice in OperatorLink?
Every person who joins an OperatorLink jobsite can participate in its browser voice call. [1] Tapping calls such as Go Ahead, Copy That and All Clear sends them as chat messages. [1] Agree when crews should ask questions and how they identify the intended recipient before work begins.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift