2Dig Plain comparisons of crane signalling and jobsite communication tools

How to Coordinate Lifts Between Floors and the Ground for Glazing and Curtain Wall Installers

Plan glazing and curtain wall lifts between the ground and upper floors. Prepare the crew, agree on signals, choose tools and avoid common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

To coordinate lifts between floors and the ground, agree on who directs the lift, who watches the load, how each floor communicates with the ground crew, and which signal means stop. Check the work area, the load path, the phones or radios, and the agreed backup signals before moving glass or curtain wall panels. OperatorLink is one option for showing STOP, HOLD and SLOW to the jobsite crew and passing button presses, chat and voice between phones in a browser. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1]Currently free to use, no paid plan built yet. [1]not published
Two-way radioNot described in the available facts. Check that every crew member can hear and answer over site noise.not publishednot published
Phone video call appNot described in the available facts. Check whether the crew can keep the call open for the whole shift and whether the phone locks its screen mid-lift.not publishednot published
Direct voice call between phonesnot publishednot publishednot published

What you need before you start

Before moving glazing units or curtain wall panels between the ground and upper floors, agree on the lift plan with everyone involved. Identify who directs the movement, who watches the load, who receives it at the destination floor, and who can call STOP. Make sure the crew understands who is responsible for each part of the lift and how to communicate when the load is out of sight.

Walk through the intended load path. Check the ground-level loading area, the receiving floor, access points, and any places where people could enter the movement area. Agree on how the crew will report that a floor is ready to receive the load and how the operator will know when to hold position.

Choose a primary communication method and a backup before starting. If using phones, check that each phone has a working browser and data signal, because OperatorLink passes signals between phones through a browser. [1] If using radios or another method, confirm that every crew member understands the signals and can communicate clearly.

For OperatorLink, the person starting the jobsite shares a link or QR code, and the crew joins from it. [1] Agree on the meaning of STOP, HOLD, SLOW, and any movement instructions before the first lift. Check that every person has joined and knows what to do if communication becomes unclear.

Step by step

  1. Assign the people involved. Identify the lift operator, the person directing the movement, the ground crew, and the receiving crew on the destination floor. Make sure everyone knows who is authorized to direct movement and who can call STOP.
  1. Review the load path. Check where the glazing unit or curtain wall panel will travel, where it will be received, and where people need to stay clear. Confirm that the receiving area is ready before bringing the load toward it.
  1. Agree on signals. Set a clear meaning for STOP, HOLD, SLOW, and movement instructions. Make sure the operator and crews at each floor understand how to communicate a change in conditions. Do not start moving the load until the required people are ready and the communication method is clear.
  1. Check the communication tools. Test the selected method with the people involved before the lift. For phones, check the browser and data signal. OperatorLink runs in a phone browser without an app install, and button presses, chat and voice pass between phones in the browser. [1] [1] If using radios, check that the intended crew members can hear and answer one another.
  1. Bring everyone into the same communication session. If using OperatorLink, have the person starting the jobsite share a link or QR code and ask each crew member to join. [1] Confirm that the ground crew and receiving floor can see the agreed signals before movement begins. Decide in advance how the crew will respond if someone cannot communicate.
  1. Confirm readiness before moving. The receiving crew should confirm that the destination area is ready and that the path is clear. The person directing the movement should check that the operator has received the instruction. If a response is unclear or missing, stop the movement and resolve the communication problem before proceeding.
  1. Control movement in clear stages. Give one understandable instruction at a time. Use HOLD when the load needs to remain in position and SLOW when the crew needs slower movement. With OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1]
  1. Stop when conditions change. If a person, obstruction, unclear instruction, or communication problem interrupts the agreed plan, call STOP and follow the site's stop procedure. In OperatorLink, STOP releases every move still being pressed on every phone and shows a full-screen alert to everyone else. [1] Confirm that the reason for stopping has been addressed before movement resumes.
  1. Confirm receipt and finish the lift. The receiving crew should confirm when the load is in the intended position and the movement is complete. Follow the agreed procedure for securing the load and ending the lift. When the work session is finished, make sure the crew knows whether the communication session will be used again or needs to be started fresh.

Tools that can do it

OperatorLink is made by the team that publishes this site, 2Dig. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app; the page runs in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A two-way radio is another option to consider for communication between the operator and crews at different levels. Agree on the channel, call signs, signal words, and the response expected after each instruction. Check that the crew can hear and answer clearly from the places where they will work. The available facts here do not establish a particular radio's range, cost, or features, so check those details for the radio being considered.

A phone video call app is another possible option to investigate. Before choosing one, check whether the crew can communicate from the required positions, whether the signal person's instructions remain clear, and whether the call can stay available during the lift. The available facts here do not establish the features, cost, or performance of any particular video call app.

Match the method to the work area, the crew's communication needs, and the site's lift procedure. Keep an agreed backup ready, and do not treat a phone session or radio conversation as a reason to ignore the established lift plan.

Common mistakes to avoid

Starting before the receiving floor is ready. Confirm that the destination area and the people receiving the load are ready before movement begins. If the receiving crew cannot confirm readiness, hold the lift until the issue is resolved.

Giving instructions from more than one person. Agree on who directs the movement and how other crew members raise concerns or call STOP. Unclear authority can lead to conflicting instructions, so settle the communication roles before the lift.

Assuming everyone has received the signal. Ask for a clear response before proceeding when the lift plan requires one. With OperatorLink, a move is dropped by the other phones if it stops arriving for 2 seconds. [1] If communication is unclear, stop and establish contact again.

Expecting every phone to alert in the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check each device's screen and alert behavior before relying on it during a lift.

Leaving HOLD or SLOW active without checking. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Make sure the crew understands when those signals remain active and when the session is finished.

Reusing an old session without checking it. An OperatorLink jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1] Start a fresh session when needed and share its new link or QR code with the crew.

Relying on one communication method without a backup. Phone-based signals depend on a working data signal. [1] Agree on the site's fallback method before the lift, and use the established stop procedure whenever the crew cannot communicate clearly.

Things to check before you choose

Before selecting a communication tool for glazing and curtain wall lifts, check how many people need to communicate, where they will stand, and whether instructions need to be shared across more than one floor. Confirm whether the method provides shared visual signals, voice communication, written messages, or only some of these.

For a phone-based option, check the data signal in the actual work areas, the behavior of each phone, and what the crew should do if a message or instruction does not arrive. For OperatorLink, also check that everyone understands how STOP, HOLD and SLOW behave, that each person has joined the correct jobsite, and that the crew knows when a session expires. [1] [1] [1]

For a radio or video call app, check the specific service's cost, supported devices, coverage, group communication features, and any limits that matter to the lift. The available facts here do not establish those details for a particular rival option. Confirm the answers with the provider and keep the final choice consistent with the site's lift procedure.

Frequently asked questions

How can glazing crews coordinate lifts between floors and the ground?

Agree on who directs the lift, who receives the load, and who can call STOP. Review the load path, confirm the destination floor is ready, and choose a communication method that everyone understands. Check that the crew can communicate from its working positions and agree on a backup before movement begins. If an instruction is unclear or communication is interrupted, stop the lift and resolve the issue before continuing.

Can OperatorLink show STOP, HOLD and SLOW to glazing crews?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1] STOP releases every move still being pressed on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Make sure the crew understands these behaviors before the lift.

Does OperatorLink need an app installed on every phone?

OperatorLink runs in a phone browser without an app install. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] The app can also be added to a phone's home screen as a standalone app. [1] Check that each phone has a working browser and data signal in the places where the crew needs to communicate.

What happens if a glazing crew member presses STOP in OperatorLink?

STOP releases every move still being pressed on every phone and shows a full-screen alert to everyone else. [1] The crew should follow the site's stop procedure, confirm why the lift stopped, and check that the issue has been resolved before movement resumes. Do not continue the lift when the operator or receiving crew cannot understand the instructions. Agree on the response to STOP before the first movement.

Can OperatorLink connect the ground crew with workers on upper floors?

OperatorLink passes button presses, chat and voice between phones in a phone browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] The phones need a working data signal for communication between them. Check reception at the ground and receiving floor, and agree on a backup method for any interruption.

Is OperatorLink free for glazing and curtain wall installers?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser, with no app install needed. [1] The crew still needs a working data signal for the browser-based communication to pass between phones. [1] Check the conditions at the site before relying on it for a lift.

Do OperatorLink STOP alerts make every phone buzz?

On Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [1] The crew should check the screen and alert behavior on each phone before the lift and should not assume that every device gives the same alert. Agree on the backup communication method in case a crew member misses a signal or cannot access the session.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons