2Dig Plain comparisons of crane signalling and jobsite communication tools

Coordinating deck lifts with the crane operator above

Coordinate deck lifts with the crane operator above: what offshore crane crews need ready, the steps, tool options, and common mistakes to avoid.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A deck lift goes more smoothly when the crane operator and the deck crew agree one set of signals, one signal person, and a backup before the load moves. A shared phone session such as OperatorLink can carry STOP, HOLD and SLOW to every phone at once. [1] Hand signals or a radio should stay ready as the backup.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before a deck lift starts, the crane operator above and the deck crew need one agreed set of signals, one named signal person for each lift, and a backup plan for when a signal does not get through. Agree in writing who gives the signals, so the crane operator takes direction from one voice only.

Every phone or radio on the deck needs a charged battery and a signal for the whole shift. Offshore, coverage can change from one spot on the deck to another, so check the signal at the lift position before the load is rigged, not after.

Make sure everyone who gives or watches a signal uses the same words. Agree what STOP, HOLD and SLOW mean before the first lift, and say them aloud at the pre-lift talk.

HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]

Keep hand signals and a radio ready as a backup in case the phone signal drops, and test the backup before the shift starts.

Step by step

  1. Hold a pre-lift talk with the crane operator and the deck crew. Agree the load, the lift path, the landing point and who gives each signal.
  2. Check that every phone or radio has charge and a signal at the lift position.
  3. If the crew uses a browser session such as OperatorLink, open it on a phone browser before the load leaves the deck. The session runs in a phone browser with no app to install. [1]
  4. The person who starts the session shares the link or QR code, and each crew member joins from it. [1]
  5. Confirm every crew member has joined before the load moves, so each person sees the same signals. [1]
  6. Agree which signals stay on. HOLD and SLOW stay on for everyone until the last person leaves. [1]
  7. Keep each move button held while the crane operator moves the load. Holding a move button keeps that move arriving on the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [1]
  8. If anyone sees a problem, the crew calls STOP. In OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  9. After the lift, everyone leaves the session. A session with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A phone video call app is a second option. This page has no details on any specific app, so check whether the crew can keep the call open for the whole lift, whether the signal person stays in view of the crane operator, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. This page has no details on any specific radio, so check that the crew agrees on plain voice, that every member can be heard over machine noise on the deck, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready. Check signal coverage at the lift position before relying on a browser session.

Common mistakes to avoid

Relying on a single signal path for the lift. If one phone or radio loses its signal at the lift position, the crane operator may not get the call in time, so keep a voice or hand backup ready.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]

Leaving a session open after the lift and expecting it to hold signals the next day. A session with nobody in it is wiped after 3 idle hours. [1]

Reusing an old link from an earlier shift. A link stops working 12 hours after the first person joins it. [1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [1]

Not confirming that moves still arrive. If a move stops arriving for 2 seconds, the other phones drop it. [1]

Letting the phone lock mid-lift. The page can be added to the phone's home screen as a standalone app, so check each phone's screen settings before the lift as well. [1]

Frequently asked questions

Is OperatorLink free to use for deck lifts?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Check signal coverage at the lift position before the shift. Confirm any future costs before relying on the tool for a planned job, and keep a backup method for the signals so a lift does not depend on one phone.

What happens when STOP is sent during a deck lift in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the session. [1] Agree before the lift who clears HOLD and SLOW, so the crew knows what the screens should show when the lift ends.

How long does an OperatorLink session link stay active?

A link stops working 12 hours after the first person joins it. [1] A session with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a fresh session and share the new link or QR code with the crew, so nobody joins from an old one. [1]

Do STOP signals buzz on every phone during a crane lift?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] On an iPhone, the crew may only see the alert on screen, so check the sound and screen settings on every phone before the lift. Checking those settings helps the crew catch signals during the move.

Can OperatorLink carry voice calls during a deck lift?

Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal as a fallback for the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons