2Dig Plain comparisons of crane signalling and jobsite communication tools

How to coordinate barrier section lifts with the crane operator

Prepare the crew, agree on lift signals and coordinate flood barrier section lifts with the crane operator using clear communication tools.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Coordinating flood barrier section lifts starts with agreeing on who communicates with the crane operator, how the crew sends STOP, HOLD and SLOW, and what happens when a signal is unclear. Choose a communication method before the lift, make sure everyone knows how to use it, and keep a fallback ready. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published
Hand signalsnot publishednot publishednot published

What you need before you start

Before coordinating a flood barrier section lift, get the crane operator and ground crew together to agree on how lift instructions will be passed and acknowledged. Identify the person responsible for communicating with the operator and make sure the rest of the crew knows who is giving instructions. Agree on the meaning of STOP, HOLD and SLOW before the section is lifted.

Decide how the crew will communicate throughout the lift. Consider whether the chosen method allows the operator and ground crew to exchange instructions clearly, whether everyone can take part, and what happens if communication becomes unclear. Keep an agreed fallback available rather than depending on a single phone or communication method.

If OperatorLink is being considered, each person needs a phone with a working browser and data signal because button presses, chat and voice pass between phones in a browser. [1] The person starting the jobsite needs to share a link or QR code so the crew can join. [1] Decide which signals stay active and how the crew will clear them before beginning the lift. HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1]

Step by step

  1. Agree on who communicates with the crane operator. Identify the person responsible for passing instructions during the barrier section lift. Make sure the ground crew knows who is communicating with the operator and how to raise a concern if instructions are unclear.
  1. Agree on the signals before the lift. Confirm what STOP, HOLD and SLOW mean to everyone involved. Discuss how the crew will communicate when a section needs to remain in position and how an instruction will be acknowledged. Do not leave the meaning of a signal open to interpretation.
  1. Choose the communication method. Decide whether the crew will use a phone-based method, a two-way radio or hand signals. Check what each option provides before relying on it. If a phone browser is being used, check that the phones have a working data signal for the shift.
  1. Bring the crew onto the same communication method. If using OperatorLink, the person starting the jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink passes button presses, chat and voice between phones in a phone browser. [1] Confirm that the intended crew members have joined before starting.
  1. Check the STOP, HOLD and SLOW signals. OperatorLink shows these signals to the jobsite crew. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Make sure everyone understands the difference before relying on the signals.
  1. Agree on how movement instructions are maintained. With OperatorLink, holding a move button keeps sending that move to the other phones. If it stops arriving for 2 seconds, the other phones drop it. [1] Understand what this means for communication during the lift and keep the agreed fallback available.
  1. Keep communication open during the lift. Anyone who joins an OperatorLink jobsite can take part in a voice call from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Agree on how the crew will use these messages and voice during the job.
  1. Close the communication session at the end. Have everyone leave the OperatorLink jobsite when the work is finished. A jobsite with nobody in it is wiped after 3 idle hours. [1] A jobsite link stops working 12 hours after the first person joins it. [1] Start a fresh session when a new link is needed.

Tools that can do it

OperatorLink

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app because the page runs in a phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

STOP releases every held direction on every phone and displays a full-screen alert to everyone else. [1] HOLD and SLOW remain active for everyone until the last person leaves the jobsite. [1] Anyone who joins can take part in a voice call, while one-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Phone video call app

A phone video call app is another option to consider. No facts here describe how a particular app handles crane lift communication. Before choosing one, check whether the operator and ground crew can see and hear the people they need to communicate with, whether the call can remain available during the work, and what happens if a phone loses its connection.

Two-way radio

A two-way radio is another option to consider for communication between the operator and ground crew. No facts here describe a particular radio or its functions. Check how the crew will pass instructions, acknowledge messages and handle unclear communication before choosing this option.

Hand signals

Hand signals are another option to consider when agreeing on communication for the lift. No facts here describe a particular hand-signal system. Check which signals the crew will use, who is responsible for giving them and whether the operator and ground crew have agreed on their meaning.

Match the communication method to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.

Common mistakes to avoid

Relying on an unclear chain of communication: agree on who gives instructions to the crane operator before the barrier section lift begins. Everyone should know who is responsible for communicating and how an unclear instruction will be handled.

Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the screen and alert behavior on every device before relying on the communication method.

Treating HOLD and SLOW as temporary signals: both stay on for everyone in the OperatorLink jobsite until the last person leaves. [1] Make sure the crew understands how these signals are cleared.

Assuming a move instruction remains active if it stops arriving: OperatorLink drops a move on the other phones if it stops arriving for 2 seconds. [1] Keep the agreed fallback available.

Leaving an empty jobsite open between shifts: a jobsite with nobody in it is wiped after 3 idle hours, and its link stops working 12 hours after the first person joins. [1] [1] Start a fresh session when needed.

Depending on one phone for every instruction: browser communication depends on a working phone data signal. [1] Keep another agreed communication method available if the connection becomes unavailable.

Frequently asked questions

How should flood barrier installation crews coordinate lifts with a crane operator?

Agree on who communicates with the crane operator, what STOP, HOLD and SLOW mean, and how instructions will be acknowledged. Choose a communication method before lifting begins and make sure the ground crew understands how to use it. Discuss what happens when an instruction is unclear or communication becomes unavailable, and keep an agreed fallback ready.

Can OperatorLink coordinate flood barrier section lifts?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person starting the jobsite shares a link or QR code, and the crew joins from it. [1] The crew should agree on communication responsibilities and a fallback before the lift.

What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently because they stay on for everyone until the last person leaves the jobsite. [1] Make sure the crew understands these differences before using the signals.

Can OperatorLink work without installing an app?

OperatorLink runs in a phone browser and does not require an app install. [1] The person starting the jobsite shares a link or QR code, and other crew members join from it. [1] The phones still need a working data signal because button presses, chat and voice pass between phones in a browser. [1]

Is OperatorLink free for flood barrier installation crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The communication features run through a phone browser, so the phones need a working data signal. [1] Check that the crew has access to a suitable connection and agrees on a fallback communication method before depending on the service during a shift.

Can flood barrier crews talk to the crane operator through OperatorLink?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are also sent as chat messages. [1] The crew should agree on how these communication methods will be used and keep a fallback available.

How long does an OperatorLink jobsite stay available?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For another shift, the person starting the jobsite should create a fresh session and share its new link or QR code with the crew.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons